Cost guides

What an articulated dump truck costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 20 November 2026

Used articulated dump trucks are listed from $145,000 for a 2014 Komatsu HM400-3 with 13,376 hours to $995,000 for a 2022 Volvo A60H, all ex GST. Most 24 to 41 tonne trucks from 2014 to 2020 ask $185,000 to $395,000. Payload class, hours and tyre condition move the price most.

$145k to $995kasking prices on 14 priced listings, ex GST
$185k to $395ktypical ask for 24 to 41 tonne trucks, 2014 to 2020
$174 an houraverage wet hire, 21 to 30 tonne truck (Felix, May 2023)
POAhow new trucks are advertised

An articulated dump truck is priced like a used mine or civil haul truck, not like a road tipper. A 2014 Komatsu with 13,376 hours asks $145,000, while a 2020 model of the same truck asks $395,000, and a 55 tonne Volvo asks nearly $1m. Payload class, hours, tyre life, drivetrain history and dealer warranty move the price. This guide sets out 15 live listings across Victoria, Queensland, New South Wales and Western Australia, the spread by payload class, hire rates for comparison, why Moxy has dropped off the market, and how a purchase is financed.

What used articulated dump trucks are listed for

This is a price guide for the haul truck, not the 6x4 tipper you see on the road. If you need a road-registered tipper, read our tipper truck cost guide. The table below is every Machines4u listing we could open on 19 November 2026 that showed a price, plus one Pickles unit with none. Prices are ex GST unless noted, the seller's own figures, and indicative market data, not Ventas offers. Several sellers list the same truck under both an eastern and a Western Australian address, so confirm where the machine is before you spend on a flight.

ListingTruckHoursAsking price (ex GST)Where
Machines4u 12342302014 Komatsu HM400-313,376$145,000Coopers Plains, QLD (Wanless Machinery)
Machines4u 12942572016 Volvo A40G9,805$185,000Header says Penrith, NSW, description says incoming Midland, WA
Machines4u 10629822012 Volvo A30F, two trucks12,800 and 13,300$195,000 eachMidge Point, QLD
Machines4u 12450732014 Cat 725C, civil spec, tailgate13,500$230,000Ravenhall, VIC
Machines4u 12598482019 Cat 7307,617$275,000, negotiable (GST status conflicts on the page)Campbellfield, VIC. Listing says all tyres require replacement
Machines4u 12851942022 Cat 7253,077$295,000Header says Penrith, NSW, description says Midland, WA
Machines4u 12804872016 Cat 745C10,710$295,000Clayton, VIC (William Adams)
Machines4u 12479262017 Bell B40E4,704$298,000Header says Penrith, NSW, description says Midland, WA
Machines4u 12849072020 Cat 745-04A11,029$300,000Clayton, VIC (William Adams)
Machines4u 12804612018 Cat 740E8,275$320,000Clayton, VIC (William Adams)
Machines4u 12506402020 Komatsu HM300-52,402$350,000Header says Penrith, NSW, description says Brisbane
Machines4u 12804702018 Cat 730-047,613$385,000Clayton, VIC (William Adams)
Machines4u 12581242020 Komatsu HM400-38,068$395,000Welshpool, WA (Brooks Equipment)
Machines4u 12316682022 Volvo A60H2,420$995,000Header says Penrith, NSW, description says Midland, WA (Allied Equipment Sales)
Machines4u 12912462006 Bell B30D 6x614,668Ask for price (Pickles Auctions)Tamworth, NSW seller, located at Spring Farm

Three things stand out. First, the spread inside one class is wide: the two 36 to 41 tonne trucks at the ends are a 2014 Komatsu HM400-3 at $145,000 and a 2020 HM400-3 at $395,000, a gap of $250,000 for the same model, driven by six years of age and 5,300 fewer hours. Second, Cat dealer-held trucks in Victoria sit in a tight band: a 2016 745C at $295,000 and a 2020 745-04A at $300,000 are only $5,000 apart, with 321 hours between them. Third, the Cat 730 pair shows how much condition counts. A 2019 730 with 7,617 hours asks $275,000 and says all tyres require replacement, while a 2018 730-04 with 7,613 hours asks $385,000. That is a $110,000 difference on near-identical hours.

Price by payload class

Payload decides which truck you are shopping for. Rated payloads below come from the makers' own pages (Volvo, Cat, Komatsu and Bell). Cat's pages show more than one figure for some variants, so confirm the exact variant with a dealer.

Payload classModels and rated payloadListings aboveAsking range (ex GST)Hours shown
24 to 29 tonneCat 725 (24 t), Cat 730 (28 t), Komatsu HM300-5 (28 t), Bell B30E (28 t), Volvo A30 (29 t)6$195,000 to $385,0002,402 to 13,500
36 to 41 tonneCat 740 (36.3 t), Cat 745 (41 t), Volvo A40 (39 t), Bell B40E (39 t), Komatsu HM400-5 (40 t)7$145,000 to $395,0004,704 to 13,376
55 tonneVolvo A60 (55 t)1$995,0002,420

Dividing asking price by rated payload gives a rough price per tonne (our arithmetic). The 2016 Volvo A40G at $185,000 works out to about $4,700 a tonne on 39 tonnes. The 2020 Cat 745-04A at $300,000 is about $7,300 a tonne on 41 tonnes, and the 2017 Bell B40E at $298,000 is about $7,600 a tonne on 39 tonnes. A 2022 Cat 725 at $295,000 is about $12,300 a tonne on 24 tonnes. Smaller trucks cost more per tonne carried, so a bigger body does not always mean a bigger cheque. It does mean bigger tyres, bigger float costs and a site that can take the machine.

New prices and Moxy

New articulated trucks are almost never priced online. Bell's new B25E, B30E, B40E, B45E, B50E and 60E adverts on Machines4u (for example advert 906157, the B40E) all read POA, and we found no published new price list from Cat, Volvo or Komatsu. Ask a dealer for a written quote that names the body, tailgate, tyres, telematics and delivery.

Moxy is a different story. People search for Moxy because the old MT31 and MT41 trucks were cheap. On 19 November 2026 the Machines4u Moxy search page showed no live Moxy dump trucks, and the Moxy brand page lists its past trucks only as sold, without prices. Treat any Moxy price you see as a 2004 to 2007 machine, check the transmission history, and expect lenders to be more cautious on it than on a 2018 Cat.

Hire rates for comparison

Buying only makes sense if the truck works enough hours. Felix published average hire rates for articulated dump trucks in May 2023, which is a dated snapshot, not a current price list.

Payload classAverage wet hire (operator included)
21 to 30 tonne$174 an hour
31 to 40 tonne$193 an hour
40 tonne plus$197 an hour

The same article's dry hire figures and state breakdown do not label wet and dry consistently, so we have not used them. At $174 an hour wet, 1,000 hours a year is $174,000 (our arithmetic), which is the scale of annual hire spend where a $230,000 used 725C starts to compete. Rates change with region and demand, so get two local quotes.

What moves the price

Financing an articulated dump truck

Equipment lenders treat an articulated truck as specialist plant. The resale market is thinner than for an excavator, so lenders look hard at age plus hours, the tyre and drivetrain condition, and whether the borrower has work lined up. Newer trucks with fewer hours are easier to fund. A 2014 truck with 13,000 hours may need a bigger deposit, a shorter term or a different lender, and some will decline it. Ventas is a broker, not a lender, so we do not quote rates or promise approval.

Illustrative only, subject to lender assessment. A used 2018 truck at a $320,000 asking price:

ItemAmount
Used 2018 articulated truck, asking price ex GST$320,000
Independent inspection, tyre and drivetrain report$3,000
Float and delivery$5,000
Service, fluids and first tyre or wear-part allowance$15,000
Total cash needed, ex GST$343,000
GST on the price (10%), paid at purchase, claimed back on the BAS if registered$32,000

And how it is typically funded:

Funding layerAmountWhat it coversSecured on
Equipment finance (chattel mortgage style)$256,00080 per cent of the ex GST priceThe truck, plus guarantees
Your deposit, cash or equity from other property$64,000The other 20 per cent of the priceCash, or property if equity is used
Your cash for costs$23,000Inspection, float, service and wear partsCash
Total, ex GST$343,000

The GST is paid on top of the price. A GST-registered business can usually claim it back on its next BAS, so some lenders fund it or bridge it for a short period. Ask your accountant how it applies to you. What makes a deal fundable: a supplier invoice or listing, a recent independent inspection, hours that fit the lender's age limit, contracts or hire history showing the truck will earn, and a clean credit file. To get a number from Ventas, send the listing or dealer quote, the machine's hours and year, your deposit and your work pipeline. See dump truck finance, earthmoving finance, the Caterpillar prices guide, the excavator prices guide, or our construction machinery finance answers.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does an articulated dump truck cost in Australia?

Used trucks we opened on 19 November 2026 ask from $145,000 for a 2014 Komatsu HM400-3 with 13,376 hours to $995,000 for a 2022 Volvo A60H, all ex GST. Most 24 to 41 tonne trucks from 2014 to 2020 ask $185,000 to $395,000. New prices are mostly POA.

What is the cheapest articulated dump truck for sale?

In this survey, the lowest ask was $145,000 ex GST for a 2014 Komatsu HM400-3 with 13,376 hours at Coopers Plains, QLD (advert 1234230). Older Moxy and Volvo trucks have been advertised for less, but no live Moxy was listed on Machines4u when we checked.

What payload does an articulated dump truck carry?

Rated payloads run from about 24 tonnes for a Cat 725 and 28 tonnes for a Cat 730, HM300-5 or Bell B30E, to 39 to 41 tonnes for a Volvo A40, Bell B40E or Cat 745, and 55 tonnes for a Volvo A60. Confirm the variant with the maker.

Can you finance a used articulated dump truck?

Often yes, but lenders look closely at age, hours, tyre and drivetrain condition and your contracts. Older, high-hour trucks may need a larger deposit or shorter term, and some lenders will decline them. Finance is subject to lender assessment, and Ventas does not promise approval.

Is it cheaper to hire than buy an articulated dump truck?

For occasional work, hire is usually cheaper. Felix reported May 2023 average wet hire of $174 an hour for 21 to 30 tonne trucks, so 1,000 hours is about $174,000 (our arithmetic). Buying starts to compete when the truck works steady hours.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

Lining up a dump truck?

Send us the listing or the dealer quote. We will come back with how lenders will look at the machine and its hours, and a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →