Cost guides

What a chaser bin costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 21 November 2026

Chaser bins on Australian listings run from $34,100 for a used 12 tonne bin to $258,500 for a 2024 Coolamon 45 tonne. New 22 to 38 tonne bins ask about $123,000 to $218,000 including GST, roughly $5,600 to $5,900 per tonne (our arithmetic). Used 30 tonne bins ask $66,000 to $110,000.

$123k to $218knew 22 to 38 tonne bins, inc GST
$5,600 to $5,900per tonne of capacity on new listings (our arithmetic)
$34k to $143kused bins, 12 to 34 tonne, inc GST

A chaser bin is priced by capacity first, then by age, auger size, scales and tyres. That is why a 2008 30 tonne bin can ask $66,000 while a new 31 tonne bin asks $175,450. Makers publish few list prices, so this guide uses 14 live dealer and marketplace listings across Victoria, New South Wales, Queensland, South Australia and Western Australia. It sets out new prices by size, used prices by age, the options that move the cost, the makes sold here and how a purchase is funded.

What new chaser bins cost

A chaser bin is the trailer that runs alongside the header, takes grain on the go and tips it into the truck at the end of the paddock. Our combine harvester cost guide covers the header it follows. Makers publish few list prices, so the table uses dealer and marketplace listings read on 20 November 2026. Figures are the seller's asking price, indicative market data and not Ventas offers.

ListingSizePrice ex GSTPrice inc GSTPer tonne inc GST (our arithmetic)
Barber Engineering, Horsham VIC (Farm Tender 126111)36 tonne, 2025, 20 inch auger, roll tarp$193,000$212,300about $5,900
Horsham VIC (Farm Tender 126110, make not confirmed)38 tonne, 2025$198,000$217,800about $5,700
J&M GC31t-1, Kerang VIC (Farm Tender 132784)31 tonne, new, 18 inch auger, 5-point scales, 900/60R32 tyres$159,500$175,450about $5,700
Midpro, Forbes NSW (Farm Tender 125612)22 tonne, 2025, single axle, 450 mm auger, no scales as standard$111,800$122,980about $5,600
Coolamon, St George QLD (RDO X189978, ID 278245)45 tonne, 2024, 800/65-32 tyres, listed as clearance$235,000$258,500about $5,700
Unverferth UM1138, OzAG MachineryDual auger, capacity not stated, scales standard$149,000$163,900Not disclosed

New bins cluster tightly. Per tonne of capacity, the five bins with a stated size ask about $5,600 to $5,900 inc GST (our arithmetic), so each extra tonne costs a similar amount. Two caveats. Farm Tender's Barber listing is titled new but its description says used, so confirm the condition before relying on it. And scales are not a given: the Midpro and Barber bins sell without them, while the J&M and Unverferth UM1138 include them.

What used chaser bins ask

Used bins are priced by size, age and what has been spent on them, and the spread is wide. The table runs from a 12 tonne bin to a 2018 34 tonne unit.

ListingSize and ageAsking price inc GST
12 tonne, Tara QLD (Farm Tender 134165)12 tonne, used, new BKT 30.5L-32 tyres, hydraulics redone$34,100 ($31,000 plus GST)
White, Billeroy NSW (Farm Tender 133277)16 tonne, 2008, bogey axle, price negotiable$35,200 ($32,000 plus GST)
Parkes Industries, Lockhart NSW (Farm Tender 117927)24 tonne, 2006$88,000 ($80,000 plus GST)
Bourgault 1100, Quambone NSW (Farm Tender 85962)30 tonne, 2008, spare tyre and rim included$66,000 ($60,000 plus GST)
Moonta Engineering, Alford SA (Farm Tender 99408)30 tonne, about 5 to 6 years old, 19 inch auger, duals, camera kit$110,000 ($100,000 plus GST)
Morgan Engineering, Queensland (Farm Dealers AhN)30 tonne, age not disclosed$143,000
Nyrex TitanX, Queensland (Farm Dealers Ato)40,000 (unit not stated), age not disclosed$132,000
Elmers Haul Master, Pointwest, Geraldton WA (stock 2376)34 tonne, 2018, load cells, roll tarp, 30 inch transfer tracks$143,000 ($130,000 plus GST)

By size, the 12 and 16 tonne bins ask about $2,200 to $2,800 per tonne (our arithmetic), while the 30 tonne Bourgault from 2008 asks about $2,200 and the Moonta bin, about five to six years old, about $3,700. The 2018 Elmers asks about $4,200. So a bin loses roughly 25 to 60 per cent of its new price per tonne on these listings, depending on age, and the ask moves more with condition than with the badge. Sellers also say what the bin has had done to it: the Tara seller lists new hydraulics and a repaint, the Moonta seller lists renewed flighting and says it keeps up with Claas 8 and 9 headers. Treat that as the seller's claim and inspect.

Listings from one Queensland dealer on Farm Dealers include prices that look like part prices or typing errors for the size shown, so we left those out. Check any bin priced far below the pack before you get excited.

Options that move the price

Two bins of the same tonnage can sit tens of thousands apart once you add the extras. Published option prices are scarce, so the table says so where a figure is missing.

OptionPublished figureSource
Bolt-on weighing kit (4 load cells, indicator)$2,375 plus GST ($2,612.50 inc GST), suits 10 and 20 tonne binsFarm Tender 124450
Scales on a bin that does not include themUnverferth UM830 lists scales as optional at plus $15,000 ex GST. The UM1138 includes themOzAG Machinery
Load cells on a Barber binListed as an optional extra, price not publishedFarm Tender 126111
Load cells on a Midpro binAvailable, price on applicationFarm Tender 125612
High flotation tyresListed as an optional extra on the Barber bin, price not publishedFarm Tender 126111
Transfer tracksFitted to the 2018 Elmers 34 tonne bin, no separate price shown. Unverferth lists tracks on applicationPointwest 2376, OzAG Machinery
Cameras and monitorIncluded on the Unverferth UM1138 and UM830. Davimac lists a three-camera kit as an option, price not publishedOzAG Machinery, Machines4U 997099

Auger size matters as much as tonnage. The listings show 18 inch augers unloading about 11 tonnes a minute (J&M), 20 inch about 12 tonnes a minute (Davimac) and a 450 mm auger about 8 tonnes a minute (Midpro). A bigger auger empties faster, which keeps the truck moving. Other items that change the price: the axle (single against bogey or tandem), tyre type, a roll tarp, a controlled traffic wheel spacing and camera kits.

Makes and sizes sold in Australia

Local makers dominate the listings: Finch, Barber Engineering, Coolamon, Davimac, Moonta Engineering, Morgan Engineering, Midpro and Parkes, with imports such as J&M, Bourgault and Unverferth, and Elmers and Nyrex (Grain King). Davimac's 30 tonne bins are listed on Machines4U (advert 997099, Molong NSW, dual axle, 20 inch auger) and OnlyTrucks (listing 112930, Glenvale QLD, single axle) but both show price on application, so we have no figure to quote. Coolamon, Dunstan and Trufab list no public price we could verify.

Sizes in the listings run from 12 tonne up to 45 tonne, and Coolamon's range extends higher. Who buys what is mostly about the header. A broadacre grower matches the bin to header capacity and truck haul distance, a contract harvester wants a bin big enough to keep several headers running, and a mixed farm stepping up a size often trades the old bin in, as the Tara seller is doing with a 12 tonne bin for a 20 tonne.

Before buying, check whether the price is ex or inc GST (Farm Tender shows both, Farm Dealers shows inc GST), what the axle and tyres are, and whether the unit is road legal where you operate. If you are also adding storage, see our grain silo cost guide.

Financing a chaser bin purchase

Chaser bins are low-value, long-life machines with a thin resale market that peaks around harvest. Lenders are generally comfortable funding new or recent bins bought from a dealer on an invoice, and more cautious with older private-sale bins, where the value is harder to pin down. Ventas is a finance broker, not a lender, so we do not quote rates here. They change with the lender, the asset and the file.

Illustrative only, subject to lender assessment. A new 31 tonne bin at the Kerang listing price:

ItemAmount
New 31 tonne bin with scales, as listed (inc GST)$175,450
Delivery and set-up allowance$3,000
Total to fund$178,450

And how it is typically funded:

Funding layerAmountWhat it coversSecured on
Equipment finance (chattel mortgage style)$125,000About 70 per cent of the totalThe bin itself, plus guarantees
Trade-in of the existing bin$35,000Value agreed with the dealerNot applicable
Cash or farm working account$18,450Balance, delivery and set-upNot applicable
Total$178,450

Equipment finance is secured on the bin, so the lender cares about the make, age, serial number and what it would resell for. A balloon or residual can lower repayments but leaves a lump sum at the end. What makes a bin deal fundable: an established farm business with recent financials, a dealer invoice, a bin under about ten years old, and a deposit or trade-in. Where tax treatment matters, such as GST credits or depreciation, ask your accountant.

To get a number from Ventas, send the make, capacity, age and price, whether it is new or used, the seller and whether it is dealer or private, and any trade-in. Start at agricultural finance or see harvester finance, and read can you finance a grain silo if storage is part of the plan. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does a chaser bin cost in Australia?

Listings run from about $34,100 for a used 12 tonne bin to $258,500 for a 2024 Coolamon 45 tonne. New 22 to 38 tonne bins ask about $123,000 to $218,000 inc GST. Used 30 tonne bins from 2008 to about five years old ask $66,000 to $110,000.

How much is a new 30 tonne chaser bin?

A new 31 tonne J&M with scales asks $175,450 inc GST, and a 36 tonne Barber asks $212,300. That is about $5,600 to $5,900 per tonne on the new listings we found (our arithmetic). Davimac 30 tonne bins are listed price on application.

Do chaser bins come with scales?

Not always. The Midpro 22 tonne and Barber 36 tonne listings do not include them, and load cells cost extra. A bolt-on weighing kit is listed at $2,612.50 inc GST. The J&M and Unverferth UM1138 listings include scales.

What size chaser bin do I need?

It depends on header capacity, paddock size and truck haul distance. The listings run from 12 to 45 tonne. Match the bin to how fast the header fills, and to the tractor and unloading auger. Ask the dealer to size it against your header.

Can I finance a chaser bin?

Often, yes. Lenders usually fund new or recent bins bought from a dealer on an invoice, secured on the bin, with a deposit or trade-in. Older private-sale bins are harder. Approval depends on the farm's financials, the asset and the seller.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

The bin, then the finance

Tell us the make, the capacity and whether it is new or used. We will come back with a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →