Cost guides

What a drill rig costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 21 November 2026

Australian drill rig listings run from $60,000 for a used Geoprobe soil sampling rig to $1.1m for a new XCMG rotary rig, with used compact geotechnical rigs at $60,000 to $110,000. Truck-mounted water bore rig prices are mostly quote only. Hours, wear, tooling and what is included drive the price.

$60k to $110kused compact geotechnical rigs on three opened listings
$450knew XCMG XR80E rotary rig, plus GST (Machines4u 905445)
$438.47IBISWorld forecast greenfield drilling price per metre, 2025-26
6 mQueensland bores deeper than this need a licensed driller

A drill rig is priced on what it drills, how it is carried and how worn it is. That is why a used Geoprobe soil sampling rig asks $60,000 while a new XCMG rotary rig asks $1.1m, and why a 2006 Soilmec has been marked down $110,000. Hours, the wear items, the tooling and what comes with the rig do most of the work. This guide sets out what listings we opened ask across Queensland, New South Wales, Victoria and Western Australia, what mining-class rigs fetched at auction, the published drilling rate, what is quote only, and how a rig purchase is funded.

What drill rigs cost in Australia

Drill rigs are mostly sold used and by private treaty, and dealers rarely publish a price for a new one. The tables below use only listings we opened on 20 November 2026. Prices are the seller's asking price, not what the rig sold for, and are indicative market data, not Ventas offers. Machines4u shows prices ex GST with GST added, so add 10 per cent where a listing does not say. We checked Queensland, New South Wales, Victoria and Western Australia listings, and found no South Australian or Tasmanian rig with a price. We could not open a priced listing for a truck-mounted water bore rig, so we do not quote a bore rig price here: ask drillers and dealers for a written quote and compare it with the rigs below.

Compact geotechnical and soil sampling rigs. These suit site investigations, environmental work and tight access.

ListingRigYear, hoursAsking price
Queensland (Geoprobe listing 14707)Geoprobe 7822DT with auger head, needs a new wiring harness2011, about 5,500 hours$60,000
Brunswick East, VIC (Machines4u 1293041)Dando Terrier tracked geotechnical rig for tight access, down to 15 m, sold with tipping trailer, augers, spares and manual2016, 307 hours$88,000 plus GST ($96,800 including GST)
Australia, state Not disclosed (Geoprobe listing 14073)Geoprobe 7822DT with two-speed head, service history offered2012, about 5,300 hours$110,000
Pakenham, VIC (Machines4u 861964)New Montabert Micro CPA II drill attachment for a 5 to 12 tonne excavator, with HC20 drifter and remote controlNew, year Not disclosed$65,000 ex GST, reduced from $90,000

Rock drills for quarry, civil and underground work.

ListingRigYear, hoursAsking price
Campbellfield, VIC (Machines4u 1252422)Tamrock Commando 100 crawler rock drill, rebuilt, new Montabert HC50 drifter and Caterpillar engine1994, total hours Not disclosed (engine 20 hours)$125,500 ex GST (the page also shows $137,500 and $138,050 including GST)
Perth, WA (Machines4u 1291850)Sandvik DL421 underground production long hole drill, with spare feed cylinder and stinger cylinder2017, 3,130 engine hours$295,000 ex GST ($324,500 including GST)

Rotary rigs for larger holes. These are piling-class rigs, which we cover in our piling rig cost guide. They show where large rig prices sit.

ListingRigYear, hoursAsking price
Heatherbrae, NSW (Machines4u 960667)Soilmec R625 rotary rig, 36 m Kelly mast, Deutz engine of about 400 hp, tracks about 60 per cent worn, PileSafe report pending2006, hours Not disclosed$285,000 ex GST, reduced from $395,000
NSW, QLD, VIC, SA, WA, NT (Machines4u 905445)New XCMG XR80E rotary rig, 24 m with Kelly bar, 13 m with CFA, 80 kNm torqueNew$450,000 plus GST ($495,000 including GST)
NSW, QLD, VIC, SA, WA, NT (Machines4u 844209)New XCMG XR240E rotary rig, 70 m with Kelly bar, 18 m with CFA, 240 kNm torqueNew$1,100,000 ex GST ($1,210,000 including GST)

Three things stand out. Compact used rigs ask $60,000 to $110,000, and the lowest-priced ones carry a flagged fault or high hours: the $60,000 Geoprobe needs a wiring harness and the 2012 Geoprobe has about 5,300 hours. Condition shows in the discount: the Soilmec R625 has come down from $395,000 to $285,000 with tracks about 60 per cent worn. And new large rotary rigs are the one place a price is published, at $450,000 for the XR80E and $1,100,000 for the XR240E.

Support gear and what is quote only

A working rig needs more than the machine. Air rigs need a compressor, mud rigs need a pump and mixing tanks, and most contractors need a truck for rods and casing. The Dando Terrier listing includes a trailer, augers, spares and a manual, and the Sandvik DL421 comes with spare cylinders, so check what is included before comparing two prices. We could not open a priced listing for a compressor, rod truck or drill string, so treat those as quote items. The one support item we confirmed is a mud pump sloop with two 2,500 litre tanks, which closed at $49,500 at auction in February 2024 (GST exclusive, plus a 10 per cent buyer's premium).

Makers sell new rigs against specification. The Geoprobe page for its truck-mounted water well rig shows no price and asks buyers to call for a quote, so new bore rig prices are quote only.

What mining-class rigs fetch at auction

Auction pages show what a rig reaches without negotiation, with a caveat: they show the current or closing bid, and not every lot is marked sold. These are mining-class rigs, and the results are from 2024, so they date the market and do not describe it today.

LotWherePrice shown
Epiroc (Atlas Copco) D65 drill rig, 2011, 21,475 hours, Caterpillar C15 engine, spares and a sea container (closed 13 February 2024)Canning Vale, WA$200,000 after 1 bid
DRA mud pump sloop, two 2,500 litre mixing tanks, Perkins diesel (closed 13 February 2024)Canning Vale, WA$49,500 after 59 bids
Caterpillar MD6420 rotary blasthole rig (closed 19 November 2024)Muchea, WA$50,000 shown, no bids
Caterpillar blasthole rig, titled MD6240 on the lot and MD6420 in the summary (closed 19 November 2024)Neerabup, WA$50,000 shown, 1 bid
Atlas Copco M2D underground drill (closed 19 November 2024)Wacol, QLD$61,000 shown, 12 bids
Sandvik THDP1500 surface drill rig (closed 19 November 2024)Welshpool, WA$6,000 shown, no bids

The 2011 D65 with 21,475 hours reached $200,000 on a single bid, and several blasthole rigs drew no bids at $50,000. High hours and a thin pool of buyers cut prices hard. Auction figures are GST exclusive with a 10 per cent buyer's premium on top.

Drilling rates

A rig is paid for by metres drilled, so buyers check rates before they buy, but published rates are thin. IBISWorld, using Australian Bureau of Statistics data, forecasts the average price of greenfield drilling services (new mineral exploration, including equipment, labour, contracting and transport) at $438.47 per metre for 2025-26. That is an industry average for exploration work, not a water bore or geotechnical rate, and we did not find a published rate we could open for those.

Queensland's government says a bore deeper than 6 metres must be drilled by a licensed driller, and that the drilling agreement should set the charge for a dry hole and for a completed bore. Check your state's driller licensing before you buy, because a rig without a licensed operator cannot earn. Ask any driller you benchmark against for dry-hole and completed-bore rates separately.

What to check on a used rig

For the machines that carry and support a drilling business, see our excavator prices guide.

Financing a drill rig purchase

Ventas is a finance broker, not a lender, so we do not quote rates here. Lenders are cautious about drill rigs. They are specialist, many are old, the buyer pool at resale is thin, and a rig earns only with a licensed operator and work lined up. Expect a deposit, and expect older or high-hours rigs to be discounted or declined. Private sales of a single machine without a recent valuation are harder than dealer sales.

Illustrative only, subject to lender assessment. A starter purchase for a small geotechnical contractor, built on the Dando Terrier asking price. The rig price is from the listing and the other lines are assumptions.

ItemAmount ex GST
Used compact geotechnical rig (the Dando Terrier listing price)$88,000
Mechanical inspection and pre-purchase repairs (assumed)$5,000
Transport and set-up (assumed)$3,000
Working capital for fuel, wages and consumables (assumed)$20,000
Total cash needed, before GST$116,000

And how it is typically funded across lender types:

Funding layerAmountWhat it coversSecured on
Equipment finance on the rig$66,000About three quarters of the rig priceThe rig, with the lender's own valuation
Your funds: savings or a property-backed loan$50,000Deposit, repairs, transport and working capitalCash, or your home or other property
Total$116,000

Equipment finance, usually a chattel mortgage, is secured on the rig and valued on what it would resell for, which can be less than the asking price. A property-backed loan secured on your home or another property can cover the gap, because the lender relies on the property. The cost is that your property is at risk if the business struggles. For tax treatment, including any depreciation or deduction, ask your accountant.

What makes a drill rig deal fundable:

To get a number from Ventas, send the listing or dealer quote, the rig's hours and year, what tooling is included, your licence and experience, and the deposit or security you can offer. Start at drilling rig finance, see mining machinery finance, or read how to finance a drill rig. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does a drill rig cost in Australia?

Opened listings show used compact geotechnical rigs at $60,000 to $110,000, rock drills at $125,500 to $295,000 ex GST, and a used Soilmec rotary rig at $285,000 ex GST. New XCMG rotary rigs are listed at $450,000 and $1,100,000. Truck-mounted water bore rigs are mostly quote only.

How much does a water bore drilling rig cost?

We could not open a priced listing for a truck-mounted water bore rig, so we do not quote a figure. Makers such as Geoprobe ask buyers to call for a quote. Get written quotes and compare them with used compact rigs, which start around $60,000.

What does the support gear for a drill rig cost?

Prices for compressors, rod trucks and drill string are not published on pages we could open, so treat them as quote items. A used mud pump sloop with two 2,500 litre tanks closed at $49,500 at an auction in February 2024, plus buyer's premium.

How much do drillers charge per metre?

Published rates are thin. IBISWorld forecasts $438.47 per metre for greenfield exploration drilling in 2025-26, an industry average that includes equipment and labour. For water bores, ask for itemised quotes with the dry-hole and completed-bore charges set out in the drilling agreement.

Can I finance a used drill rig?

Often, but lenders are cautious. Equipment finance is usually secured on the rig, and age, hours, condition and a licensed operator all matter. Older or high-hours rigs may be discounted or declined, and a deposit is usual. Approval is subject to lender assessment.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

Found a rig?

Send us the listing or the dealer quote. We will come back with how lenders will look at the rig, its age and its hours, and a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →