Development guides

What it costs to develop a retirement village in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 13 November 2026

Villas and units for a retirement village cost about $2,250 to $5,800 per square metre to build in 2026 on Rider Levett Bucknall's walk-up and townhouse rates, or $285,000 to $700,000 a unit in Melbourne, before land and a clubhouse. Announced projects work out near $1.05 to $1.24 million a home all-in.

$2,250 to $5,800 a m2RLB walk-up and townhouse build rates across six capitals, Q4 2025, ex GST
$285k to $700k a unitRLB Melbourne walk-up units and townhouses, ex car park and site works
$127,000 a siteaverage Colliers land lease community development cost, Qld, NSW and Vic
$1.24m a homeWesley Mission Ermington, $270m for 218 homes (our arithmetic)

A retirement village does not have one cost. A single-storey villa on a regional site, a three-storey building of independent living units and a land lease community of manufactured homes sit at very different points, and no cost guide prices them as a category. Rider Levett Bucknall publishes rates for the buildings closest to them, residential townhouses and walk-up units and aged care, so those are the best published anchors. This guide sets out those rates, the cost lines a feasibility must carry, what listed sites and announced projects show, what moves feasibility, and how a first stage is funded.

What it costs to build

Rider Levett Bucknall (RLB) does not publish a retirement village rate. Its Riders Digest 2026 does price the two building types an independent living unit sits between: medium-quality townhouses and walk-up units, and single-storey aged care. All figures are current at the fourth quarter of 2025, in dollars per square metre of gross floor area, and exclude GST. The rates exclude car parking, and the per-unit rates below also exclude site works. They are indicative market data, not Ventas offers.

CityWalk-up units, 85 to 120 m2 a unitTownhouses, 90 to 120 m2 a unitAged care, single storey facility
Adelaide$2,500 to $3,500$2,250 to $3,100$3,950 to $4,500
Brisbane$3,150 to $5,800$2,600 to $5,100$4,500 to $5,500
Canberra$2,250 to $5,400$2,250 to $5,300$2,650 to $4,350
Darwin$2,750 to $3,900$2,500 to $3,600$4,300 to $6,200
Melbourne$2,800 to $5,200$2,800 to $4,850$3,600 to $5,200
Perth$3,250 to $5,300$2,950 to $5,300$3,950 to $4,750
SydneyNot publishedNot published$3,900 to $5,100

In Melbourne, RLB prices walk-up units of 85 to 120 m2 at $285,000 to $585,000 a unit, townhouses of 90 to 120 m2 at $315,000 to $700,000 a unit, and an aged care facility at $275,000 to $335,000 a bedroom. Three things matter when you use these. The spread inside each city is wide because finish, height and layout move the rate. Villages add accessibility features, such as step-free showers and wider doors, that a standard townhouse rate does not carry. And a village has shared buildings that the rates do not cover, so add them as a separate line.

What announced projects and sites show

Prices for retirement village land are rarely published. Most agents list sites as expressions of interest or contact agent, so the table below shows what is public. It combines announced project budgets, which show all-in cost per home, with live sites and one portfolio sale. The dollar-per-home figures are our arithmetic from reported totals, not figures the developers published.

Project or siteStateWhat is publishedOur arithmetic or note
Wesley Mission, Ermington (retirement village apartments and villas, no residential aged care)NSWEstimated project cost $270 million for 218 homes (179 apartments, 39 villas), reported 24 August 2026About $1.24 million a home
Levande, Bentleigh East (apartments)VICEstimated construction cost $270 million for 256 apartments, first residents from spring 2027 (reported 18 September 2026)About $1.05 million a home
RetireAustralia, The Verge stage 3, Burleigh HeadsQLD$40 million for 62 independent living units plus a care hub of 10 to 12 beds (reported April 2022)About $645,000 a unit including the care hub. Older, pre-dates recent cost rises
RetireAustralia, new ILU salesQLD, NSWNew unit prices exceeded $1 million on average in FY25 results (reported May 2025)A sale price, not a cost
Sapphire City Lifestyle Village, Inverell (DA approved, 76 homes)NSWAsking $995,000 (Development Ready 93162), down from $1.275 million in October 2024About $13,100 a site. A regional site that still needs the build
200 Hidden Valley Boulevard, Wallan (DevelopmentReady 245046)VIC22.89 ha, zoned CDZ (Mitchell Shire), marketed as a land lease or retirement site subject to council approval. Price not disclosedNo approval listed
2 Unwin Street, Weston (DevelopmentReady 266814)ACT15,465 m2 Crown lease permitting a retirement village among six uses. Price not disclosed. EOI closes 4pm 12 November 2026 (JLL)No approval listed
Keyton portfolio saleQLD, NSW, VIC11 villages, more than 2,263 independent living units, Colliers agent, sale expected to finish in 2027. Price not disclosedThe route for an operator buying instead of building

Read the spread honestly. Apartment-style retirement schemes in Sydney and Melbourne land above $1 million a home. That likely reflects lifts, basements and large shared areas, though neither project breaks its budget down. A 2022 RetireAustralia figure of about $645,000 a unit pre-dates recent cost rises and includes a care hub, so it is not a current benchmark. At the low end, an approved regional land lease site such as Inverell is asking about $13,100 a site for the approval and the land, with every dollar of build still to come.

The cost lines in a village feasibility

A village carries more cost lines than a house or townhouse project. This table sets out each line, what moves it and the best published reference found.

Cost lineWhat drives itPublished reference
LandZoning, approval status and size. An approved site costs more than a site that still needs a permitInverell approved site about $13,100 a site (asking). City sites are not comparable
Building: villas or unitsFloor area, one or two storeys, finish level and accessibility fit-outRLB townhouse and walk-up rates above, medium quality, ex GST
Clubhouse and community facilitiesPool, cinema, gym, kitchen and bar, all to commercial standardNo clubhouse rate is published. Get a quantity surveyor to price it. Wesley's plan includes a 'communal building'
Civil works and servicesEarthworks, roads, drainage, electrical and communicationsColliers land lease report: civil $64,824 (Qld), $52,362 (NSW), $63,346 (Vic) a site
Authority chargesCouncil and water infrastructure charges, set by the local scheduleColliers benchmark: $27,000 a site infrastructure charges, $23,000 a site earthworks
Professional fees and approvalsArchitect, engineers, planner, reports, surveyorSee our soft costs guide: about 2 to 7 per cent of total development cost
Holding and finance costsInterest during the build, valuation and monitoring feesDepends on the loan and the programme, so it is the line most often under-allowed

For land lease communities, Colliers Engineering and Design's 2025 report, drawn from about 3,500 sites on feasibility studies and completed projects, puts the average development cost at about $127,000 a site across Queensland, New South Wales and Victoria. That covers site development for manufactured homes the resident owns on leased land. It is a different product from a village with a building cost per unit, and the two should not be added together.

What moves feasibility

Staged delivery. Building 20 to 40 units at a time limits the debt outstanding and lets sales or deposits prove demand before the next stage.

Presales or deposits. Where units are sold outright in strata, pre-sales support a construction loan. Where residents pay an ingoing contribution under a loan-lease contract, the money often arrives at occupation, so equity must cover the build until then.

State law. Retirement village and land lease rules differ by state and are changing. Victoria's retirement village exit rules changed for contracts from 1 May 2026: the deferred management fee is a percentage of the entry payment for each year or part year, up to a maximum stated in the contract, and the page gives 3 per cent a year up to 30 per cent as an example. Consumer Affairs Victoria's April 2026 operator forum notes confirm the village reforms started on 1 May 2026, that a standard-form contract is required for contracts from 1 September 2026, and that deferred management fees can now only be a percentage of the entry payment. For land lease communities, CAV says new site agreement rules start on 1 July 2026 and the agreement must state any exit charge, but its page sets no cap. Trade press reports a Victorian cap of 20 per cent on deferred management charges for new land lease agreements, with commencement not later than 1 December 2027, which we could not confirm on an official page. Tasmania passed a law banning entry and exit fees in residential parks. Queensland caps site rent rises at the higher of CPI or 3.5 per cent. Some of these are still awaiting proclamation, so check the current state page before modelling income.

Deferred management fee against land lease. In a village, the operator earns mostly through the deferred management fee when a resident leaves, so cash comes years after the build. In a land lease community, the resident buys the home and the operator earns weekly site rent. Rent caps and fee limits therefore hit land lease returns differently from village returns.

Who buys. Developers building new, existing operators adding stages to a village (Mount Martha in Victoria is one such 32-villa extension, council-supported in September 2026), and landowners with an approved site.

How a retirement village build is funded

Retirement village development is specialist lending. Many banks are cautious about it, and most will want the operator or the developer to have built before. The 2011 lender panel reported in The Weekly Source is old, but the direction has not changed: stages of up to about 20 units, around 50 per cent pre-sales, an experienced operator and close to 50 per cent equity were the starting point, and banks generally would not fund a vertical village. Treat that as a signal, not today's policy. Ventas is a finance broker, not a lender, so we do not quote rates, and nothing here is an offer.

Lender types differ. A bank typically lends at the lower end of the loan to cost range and wants pre-sales. A non-bank lender may lend more of the cost and accept thinner pre-sales at a higher price. Private lenders can go further again, at a higher cost, and private lending is typically business-purpose and not consumer regulated. Mezzanine or preferred equity fills the gap between the senior loan and your own cash. If you already operate a village, an existing stabilised village can sometimes be refinanced to release equity for the next stage.

Illustrative only, subject to lender assessment. A 20-villa stage with a clubhouse on a site you already own. Every figure is our assumption, set inside the published ranges above, not a quote:

ItemAmount
Land (1.5 ha, approved site)$3,000,000
20 villas at 110 m2, $3,500 a m2 (2,200 m2)$7,700,000
Clubhouse, 300 m2 at $4,500 a m2$1,350,000
Civil, services and landscaping, $60,000 a unit$1,200,000
Contingency, about 5 per cent of construction$510,000
Professional fees and approvals, about 6 per cent of construction$620,000
Authority charges, $27,000 a unit$540,000
Interest, fees and holding during the build$750,000
Marketing and selling costs$300,000
Total development cost, ex GST$15,970,000

The same stage might be funded across lender types like this:

Funding layerAmountShareSecured on
Land you already own$3,000,00019%The site, counted at cost or valuation
Cash equity$2,170,00014%Your funds, or a property-backed loan against other property
Mezzanine or preferred equity$1,300,0008%Second ranking security or a share of profit
Senior construction loan (bank or non-bank)$9,500,00059%First mortgage over the site, drawn against progress
Total$15,970,000100%

Our arithmetic puts the cost at about $798,500 a villa before any sales margin. That sits below the roughly $1.05 million to $1.24 million a home implied by the Wesley and Levande projects, which are apartments and include far more shared space. It also sits below the $1 million average RetireAustralia reported for new units, but a sale price is not a profit, and the deferred management fee model delays part of the return until residents leave.

What makes a retirement village deal fundable:

To get a number from Ventas, send the site and its approval, the staging plan, the quantity surveyor's cost report, your equity and the security you can offer, and your track record. Start at development finance, read how much deposit a development loan needs in our deposit question page, and compare other care-adjacent builds in our SDA housing and co-living cost guides. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does it cost to build a retirement village in Australia?

Villas and units cost about $2,250 to $5,800 per square metre to build on RLB's Q4 2025 townhouse and walk-up rates, before land, civil works and a clubhouse. Announced apartment-style projects work out near $1.05 to $1.24 million a home all-in. Land lease sites average about $127,000 a site (Colliers).

Is a land lease community cheaper to develop than a retirement village?

Per home, usually yes, because residents buy a manufactured home on leased land and the developer builds site infrastructure rather than every dwelling. Colliers puts the average at about $127,000 a site in Queensland, New South Wales and Victoria. The returns are different too: weekly site rent against deferred management fees.

What is a deferred management fee?

It is the fee a village operator charges when a resident leaves, usually a percentage of the entry payment for each year or part year lived there, up to a cap in the contract. Consumer Affairs Victoria's example is 3 per cent a year up to 30 per cent. Rules differ by state.

Will a bank fund a retirement village development?

Some will, but it is specialist lending and many banks are cautious. Expect them to want an approved site, a staged plan, pre-sales or evidence of demand, an experienced operator and substantial equity. Non-bank and private lenders may lend more, at a higher cost. Finance is subject to lender assessment.

How much equity do I need for a retirement village build?

There is no fixed figure. Bank lending on larger development is commonly 60 to 65 per cent of cost, so expect to fund 35 to 40 per cent or more yourself, in land and cash. A 2011 lender panel cited close to 50 per cent. Mezzanine or preferred equity can fill part of the gap.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

The site, the stages and the funding

Send us the site, the approval and the staging plan. We will show you how the development can be funded.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →