Cost guides

What a bulldozer costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 6 November 2026

Used bulldozers in Australia are listed from $35,000 for an older Cat D4C to $719,900 for a 2020 D8T, with Cat D6 machines asking $189,000 to $545,000 ex GST. A new Cat D8 is listed at $900,000. Weight class, hours and the condition of the undercarriage set the price.

$35k to $900kasking prices on 21 live dozer listings across NSW, VIC, QLD and SA, ex GST
$189k to $545ksix Cat D6 listings, from a 2014 D6K2 to a 2023 D6
$22k to $45kpublished estimate to replace the undercarriage on a D6 or D65 class dozer
466dozer results on Machines4U, 5 November 2026

A bulldozer is priced by its size class first, then its hours, then the state of its tracks. That is why a 1,850 hour D3K2 asks $140,000 while a D8T with 4,500 hours asks $719,900, and why two D6 machines of the same model can sit $85,000 apart. Caterpillar and Komatsu do not publish Australian price lists, so the working numbers are in dealer listings. This guide sets out 21 live listings from the D3 class to the D9, what moves the price, the undercarriage cost that catches buyers out, and how a dozer is funded. It suits earthmoving and civil contractors, land clearing and farm development operators, and quarry and mining contractors.

What small and mid-size dozers sell for

This table covers the D3 to D6 class and the Komatsu D65, which is where most contractors and farm operators buy. The listings were opened on Machines4U on 5 November 2026. All prices are ex GST as shown, so add 10 per cent for the GST-inclusive figure. Hours and condition are the seller's claims. Figures are indicative market data and not Ventas offers. If you are weighing a digger instead, read our excavator price guide.

ListingMachine and hoursSellerAsking price ex GSTSpec shown
Wingfield, SA (Machines4U 1289777)Cat D4C, year not stated, 2,287 hoursNot stated$35,000Engine overhauled, new tracks, rollers and sprockets, hydraulic angle blade, 3-shank ripper
Traralgon, VIC (Machines4U 1184531)2015 Cat D3K2 LGP, 1,850 hoursBusiness$140,000PAT blade, Apex shoes, ripper not mentioned
Yandina, QLD (Machines4U 1202606)2014 Cat D3K2 XL, 6,300 hoursBusiness$145,9006-way blade, multi-shank ripper, tree spear, workshop report
Darra, QLD (Machines4U 535889)Cat D5K XL, 9.4 t, year and hours not statedDealer$159,000VPAT blade, new rippers, sweeps and screens, forestry package
Yandina, QLD (Machines4U 877031)2018 Cat D5K2 XL, 10.5 t, 4,400 hoursBusiness$249,900Multi-shank ripper, grade control, workshop report
Gracemere, QLD (Machines4U 1248663)2014 Cat D6K2, 10,317 hoursDealer$189,0006-way blade, multi-shank ripper, GPS
Yandina, QLD (Machines4U 1013414)2017 Cat D6K2 LGP, 4,700 hoursBusiness$274,900New chains and segments, 6-way blade, ripper to be fitted
Darra, QLD (Machines4U 724979)2014 Cat D6T XL, hours not statedDealer$295,000Full new undercarriage, SU blade, 4-barrel ripper, GPS ready
Clayton, VIC (Machines4U 1280498)2016 Cat D6T, 6,001 hoursDealer$350,000SU blade, multi-shank ripper
Yandina, QLD (Machines4U 1040337)2019 Komatsu D65EX-17, 5,200 hoursBusiness$369,9006-way blade, multi-shank ripper, 220 hp
Fairfield, NSW (Machines4U 1268893)2015 Komatsu D65PXi-18, 2,747 hoursKomatsu Australia$450,000Straight tilt blade, 915 mm grousers, 48 month or 4,000 hour extended powertrain warranty
Yandina, QLD (Machines4U 1271605)2020 Cat D6 LGP, 6,700 hours, about 24 tDealer$459,90070% undercarriage left, new multi-shank ripper, 3-month powertrain warranty
Penrith, NSW or Geelong, VIC (Machines4U 1238363)2023 Cat D6, 18 hoursBusiness$545,000SU blade, rippers, medium service tracks. Header says Penrith, text says Geelong

Three things stand out. Hours do not set the price on their own: the 2015 D3K2 LGP with 1,850 hours asks $140,000, only $5,900 less than the 2014 D3K2 XL with 6,300 hours, because the second comes with sweeps, a tree spear and a workshop report (our arithmetic). Undercarriage is the second price driver: the 2017 D6K2 LGP with new chains asks $274,900, which is $85,900 or 45 per cent more than the 2014 D6K2 at $189,000, for 5,617 fewer hours (our arithmetic). And the listings contradict themselves. The D3K2 at Yandina is described in its text as a D4K2, the D6K2 at Gracemere is also placed at Rockhampton and Dubbo, and the 2023 D6 gives two cities, so match the serial number and location to the invoice before you pay a deposit.

What large dozers sell for

The D8 and D9 class, plus the Komatsu D155 and D275, is bought by civil, quarry and mining contractors. The same rules apply: listings were opened on 5 November 2026 and prices are ex GST.

ListingMachine and hoursSellerAsking price ex GSTSpec shown
Dubbo, NSW (Machines4U 1118235)2016 Komatsu D275AX-5E0, 10,400 hoursBusiness$349,000SU blade with dual tilt, 4-barrel ripper, "good" undercarriage
Western NSW (Machines4U 1281171)2000 Cat D9R, about 36,000 hours, 50 tNot stated$350,000New undercarriage about 2,500 hours ago, 30 ft rake included
Penrith, NSW (Machines4U 1239017)2021 Komatsu D71PX-24, 2,500 hoursDealer$365,000Folding VPAT blade, 760 mm grousers, no ripper mentioned
Wetherill Park, NSW (Machines4U 1289598)2014 Cat D8T, 8,062 hoursBusiness$449,500Topcon GPS, multi-shank ripper, about 15% undercarriage left
Yandina, QLD (Machines4U 857881)2018 Komatsu D155AX-8, 7,400 hoursBusiness$549,900Sigma blade, multi-shank ripper, "very good" undercarriage
Gracemere, QLD (Machines4U 1138027)2016 Cat D9T, 17,051 hours, 47.9 tDealer$625,000Single tilt SU blade, single shank ripper, GPS and grade control ready
Yandina, QLD (Machines4U 1185254)2020 Cat D8T, 4,500 hoursBusiness$719,900New SU blade, ripper optional
Torrington, QLD (Machines4U 1066912)2022 Cat D8, new, 0 hours, 40.2 tDealer$900,000359 hp, 8SU blade of 10.3 cubic metres, single shank ripper

The new D8 at $900,000 is the only new Caterpillar dozer price in this guide. Machines4U shows nine Shantui dozers and one XCMG D170 as new, and all ten are price on application. Used D8T prices follow hours: the 2020 machine with 4,500 hours asks $270,400 more than the 2014 machine with 8,062 hours, or 60 per cent more (our arithmetic), and sits at about 80 per cent of the new D8's asking price. Machines at the top end are priced differently again. Mine-spec dozers are listed far above this range, such as a 2020 Cat D10T2 with 10,500 hours at $1,395,000 (Machines4U 1116721) and a 2023 D11 at $2,795,000 (Machines4U 1168052), and they are normally sold by used equipment brokers on behalf of owners.

What moves the price of a dozer

The running cost that surprises buyers: undercarriage

On a dozer the tracks and rollers wear out, and replacing them is the largest single repair. EquipBook, a repair-estimate site, published these ranges for a full replacement on 1 July 2026. They are one vendor's estimates, not audited data, so treat them as a planning guide.

Size classExample machinesFull undercarriage replacement
Mid-sizeCat D6, Komatsu D65$22,000 to $45,000 ($18,000 to $37,000 parts, $2,500 to $6,300 labour, 20 to 36 hours)
LargeCat D8 and D9, Komatsu D155 and D275$40,000 to $85,000
LargestCat D10 and D11, Komatsu D475Over $100,000

EquipBook says to order parts and plan replacement within the next 1,000 to 1,500 hours when 50 per cent of wear life is left, to schedule it at 30 per cent, and to treat 15 per cent or less as an emergency, because chain stretch can damage the final drive. That puts the D8T listing with about 15 per cent left in the emergency band, and that listing's seller says the price reflects the wear. Budget for it before you buy.

Other costs are not priced in this guide. We did not find a sourced Australian fuel burn figure for each model, so ask the seller for fuel use and the service history and cost them at your own fuel price. Insurance and the cost of floating the machine to site vary by state and distance. For the second, see our low loader trailer price guide. For tax treatment of the purchase or depreciation, ask your accountant.

Financing a bulldozer purchase

Dozers are mainstream earthmoving plant, and lenders fund new and used machines through equipment finance secured on the machine. Appetite is narrower than for an excavator because the resale market for a large dozer is smaller. Expect lenders to look closely at age, hours and undercarriage condition, and many cap a machine's age at the end of the loan term. A 2000 D9R with about 36,000 hours is a harder file than a 2018 D5K2. Mine-spec D10 and D11 machines are usually funded against the contract they will work on. Ventas is a broker, not a lender, so we do not quote rates here. They change with the lender, the asset and the borrower.

On documents, one broker's lender guide for 2026 says mainstream low doc programs typically want an ABN of at least 24 months with GST registered for at least 12 months, and that a used machine from a private seller priced above market can trigger a valuation and a cut to the invoice amount. Private sales and auctions add an inspection and a few days. A dealer sale with an invoice, serial number and hours is the cleanest.

Illustrative only, subject to lender assessment. A used dozer at a $450,000 asking price, ex GST:

ItemAmount
Dozer asking price, ex GST$450,000
Independent inspection and undercarriage measurement$2,500
Transport to site$5,000
First-year insurance$9,000
Spare filters, cutting edges and first service$10,000
Total cash needed, ex GST$476,500

And how it is typically funded:

Funding layerAmountWhat it coversSecured on
Equipment finance (chattel mortgage or similar)$360,00080 per cent of the machine priceThe dozer itself
Your funds: savings or a property-backed loan$116,500Deposit of $90,000 plus the $26,500 of costsCash, or your home or other property
Total$476,500

The 80 per cent figure is an illustration, not a lender policy. Terms and deposits depend on the lender, the machine and your file. A property-backed loan can fund the deposit or most of the purchase, with the risk that your property is security for it.

What makes a dozer deal fundable:

To get a number from Ventas, send the make, model, year, hours, price and seller, a recent BAS and bank statements, and any contract the machine will work on. Start at bulldozer finance, see earthmoving finance, read about financing a grader or dozer, or compare with what Caterpillar machines cost. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does a bulldozer cost in Australia?

Used dozers on 21 listings ask from $35,000 for an older Cat D4C to $719,900 for a 2020 D8T, ex GST. Cat D6 machines ask $189,000 to $545,000. A new Cat D8 is listed at $900,000. Weight, hours and undercarriage condition decide where a machine sits.

How much is a used Cat D6 or Komatsu D65?

Six Cat D6 listings ask $189,000 for a 2014 D6K2 with 10,317 hours up to $545,000 for a 2023 D6 with 18 hours. Two Komatsu D65 listings ask $369,900 for a 2019 D65EX-17 and $450,000 for a 2015 D65PXi-18 with a warranty.

How much does it cost to replace a dozer undercarriage?

EquipBook estimated on 1 July 2026 that a full replacement costs $22,000 to $45,000 on a D6 or D65 class dozer, $40,000 to $85,000 on a D8 or D9 class machine, and over $100,000 on the largest dozers. Get a measured wear report before you buy.

Are bulldozer prices shown with or without GST?

The Machines4U listings in this guide show prices ex GST and add 10 per cent for the GST-inclusive figure. Check the basis on every listing, as sellers can differ. Ask your accountant how GST applies to your purchase.

Can I get finance for a used bulldozer?

Often, but lenders look hard at age, hours and undercarriage condition, and an older or very high hour machine is harder to fund than a late model one. A dealer sale is easier than a private sale or auction. Approval depends on your trading history, the machine and any security.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

The dozer, then the finance

Tell us the make, model, year and hours and whether it is new, used or at auction. We will come back with a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →