What it costs to buy a joinery or cabinet making business in Australia
Joinery and cabinet making businesses on 11 live Australian listings ask from $149,990 for a small workshop to $3.75m for a Sunshine Coast manufacturer earning over $1m. Seven of 11 sit between $300,000 and $750,000. Brokers price on adjusted earnings, so profit, the order book and who runs the workshop drive the price.
A joinery workshop is priced on the profit left after the owner is paid, plus what its machines would fetch. That is why a Carrum Downs workshop asks $149,990 while a Sunshine Coast joinery manufacturer asks $3.75m. The order book, the factory lease, owner reliance and the age of the CNC router, edgebander and panel saw move the price. This guide sets out what 11 live listings ask, how brokers value a workshop, what the plant is worth, the costs and duty on top, who buys, and how the purchase is funded.
What joinery and cabinet making businesses sell for
If you are weighing a bigger workshop, our guide to buying a manufacturing business covers wider plant-heavy trades. This table surveys 11 live Australian listings on Bsale, AnyBusiness and BusinessForSale, checked on 14 November 2026. Figures are the vendor's, indicative market data and not Ventas offers. SAV means stock at valuation, paid on top of the price. Anything marked sold has been left out. "Not disclosed" means the listing does not show it.
| Listing | What it is | Turnover or profit shown | Premises, staff or plant shown | Asking price |
|---|---|---|---|---|
| Carrum Downs, VIC (Bsale 669158) | Cabinetry workshop, private seller | Not disclosed | Machinery list left blank on the listing, so plant not confirmed | $149,990 |
| Morisset, NSW (Bsale 686681) | Kitchen design and installation, owner retiring | Turnover $800,000 plus, PEBITDA $240,000 | Home office, one installer, buyer must be a licensed builder, cabinet maker or carpenter | $190,000 |
| Springvale, VIC (Bsale 686540) | Kitchen and custom cabinetry | Turnover about $1.3m, profit not disclosed | Rent $4,807 a month including GST, lease from February 2024 plus a 5-year option, 4 full-time staff plus owner, about $230,000 of equipment mentioned | $300,000 |
| Greater Sydney, NSW (Bsale 679903, AnyBusiness 3461382) | Custom joinery for builders and developers, set up 2022 | Turnover $1.5m to $2m, profit not disclosed | Purpose-built 520 sqm workshop, full-time operator willing to stay | $300,000 plus SAV |
| Brisbane, QLD (Bsale 683971) | Custom cabinetmaker, owner wound down after an injury | Not disclosed | Owner plus a part-time assistant, workshop tools and design software | $320,000 plus SAV |
| Beaufort, VIC (BusinessForSale DBH30003) | Custom joinery, CNC and traditional machines | Not disclosed | Owner, foreman and apprentice, plant not confirmed as included | $395,000 plus SAV |
| South Australia, 35 km from Adelaide (Bsale 685251) | Family cabinet maker, kitchens, bathrooms, laundries | Turnover over $850,000 in 2025/26, profit not disclosed | Purpose-built factory, plant included. Page shows under contract | $420,000 plus SAV |
| Hornsby, NSW (Bsale 686205) | High-end custom joinery | Not disclosed | Described as fully equipped, no itemised list | $530,000 plus SAV |
| Wetherill Park, NSW (AnyBusiness 3455919) | Custom furniture and joinery, factory and two showrooms | Not disclosed | 13 staff, factory leased 25 years, CNC, spray booth and three vans mentioned | $690,000 to $750,000 price guide |
| Perth, WA (Bsale 675899, BusinessForSale DBH28257) | Commercial joinery: offices, medical and mining fit-outs | Not disclosed | Going concern or turnkey asset purchase, vendor finance may be considered | $1,250,000 plus SAV |
| Maroochydore, QLD (Bsale 676610) | Joinery manufacture and installation, residential and multi-residential | Revenue $2,982,011, PEBITDA $1,034,057 (2026) | Stock about $100,000, work in progress extra | $3,750,000 plus SAV plus WIP |
The middle asking price is $395,000 (our arithmetic). Seven of the 11 sit between $300,000 and $750,000. Only two listings show profit, and the gap between them is wide: Morisset is a home-based design and install business, Maroochydore a factory earning over $1m. Turnover is shown on five listings and the price runs from about 0.15 to 0.5 times turnover on four of them (our arithmetic), so turnover tells you little. Most listings are written by the seller, several are flagged on the page as AI generated, and none of the figures is audited. Ask for lodged tax returns and BAS before you trust a number.
How joinery businesses are valued
Brokers price a workshop on adjusted earnings, meaning profit with the owner's wage, personal costs and one-off items added back. For an owner who works on the tools, that is usually PEBITDA, and the number is only as good as the add-backs. Benchmark Business Sales publishes the ranges below for manufacturers generally. We found no multiple published for cabinet making alone, so treat these as a guide and ask the broker for sold comparables.
| Method | Published range | Source |
|---|---|---|
| Small job shop or owner-run manufacturer | 1.5x to 2.5x adjusted earnings | Benchmark Business Sales, published 10 June 2025 |
| Established manufacturer | 2.5x to 3.5x | Benchmark Business Sales |
| Plant and equipment | Usually inside the price. Plant is valued at market value, not replacement cost, and acts as a floor. Equipment overdue for replacement is deducted | Benchmark Business Sales |
| Stock and work in progress | Added on top of the multiple-based price, typically at cost, excluding obsolete stock | Benchmark Business Sales |
| Implied by the two listings above that show profit | Morisset 0.8x ($190,000 on $240,000), Maroochydore 3.6x ($3,750,000 on $1,034,057, stock and WIP extra) | Listing figures, our arithmetic |
The two listings that show profit imply 0.8x and 3.6x. That is a bigger spread than the broker bands, which says something about how seller-written asking prices behave. The low one is a business with no factory and one installer. The high one is a 2026 profit figure from a factory with an experienced team, and a buyer should check whether it was an average year.
What the plant is worth in the sale
Most listings say machinery is included, few list it. The machine that matters most is the CNC router, then the edgebander and panel saw. The table shows what comparable machines ask on machines4u, which gives you a reference point when a seller says the plant is worth $200,000. For router detail and freight, see our CNC machine cost guide.
| Machine | Listing | Condition | Price ex GST |
|---|---|---|---|
| CNC router | LNC 1530 ATC, Ravenhall VIC (machines4u 914928) | New 2025 | From $39,999 |
| CNC router | Biesse Rover A3 4.0, Wynyard TAS (machines4u 1200155) | Used 2007 | $28,500 |
| CNC nesting router | Masterwood 38 x 18, Stapylton QLD (machines4u 264451) | New 2022 | $109,000 to $128,000 |
| Edgebander | SCM ME20, J C Walsh, VIC (machines4u 786903) | New | $14,190 |
| Edgebander | Toughcut Cobalt 25, J C Walsh, VIC (machines4u 838466) | New | $17,250 |
| Edgebander | SCM ME22, J C Walsh, VIC (machines4u 895748) | New | $20,275 |
| Panel saw | Oltre PS315 1600 mm, J C Walsh, VIC (machines4u 744382) | New | $4,450 |
| Panel saw | SCM SC 3C, J C Walsh, VIC (machines4u 880059) | New | $12,315 |
| Panel saw | Toughcut Heavy Duty CNC 3800 mm (machines4u 884742) | New | $22,726 |
| Panel saw | SCM Nova SI 400ep (machines4u 1249353) | New | $47,057 |
| Panel saw | Used SCM SI30N heavy duty (machines4u 1272605) | Used | $11,900 |
A new set at the low end of this table, the $39,999 router, the $14,190 edgebander and the $4,450 panel saw, adds to $58,639. A mid-range set using the $109,000 router, the $20,275 edgebander and the $22,726 CNC panel saw adds to $152,001 (our arithmetic, ex GST, before freight, installation, dust extraction and software). Two listings since marked sold show how much plant can sit in a sale: a Perth cabinet factory valued its plant at $169,388, and a Cairns joinery business listed plant including CNC at about $250,000 with stock and work in progress on top. The Springvale listing mentions about $230,000 of equipment, which is 77 per cent of its $300,000 asking price (our arithmetic). When plant is that large a share, a lender is mostly valuing machines, and used machines value lower than new ones.
What moves the price
- Order book and customers. Maroochydore sells to residential and multi-residential projects, and the Perth listing points to two mining-sector relationships. Ask what share of turnover comes from one builder and whether any contracts are signed or only quoted.
- Owner reliance. Beaufort has the owner on quoting, project management and customer relationships, with a foreman and an apprentice in the workshop. Greater Sydney and Wetherill Park both say the operator or staff will stay. A seller who is the business is worth less.
- The factory lease. Springvale's lease started in February 2024 with one 5-year option, and the committed term is not shown. Wetherill Park has been leased 25 years, but the remaining term is not stated. A lender wants years left, not options.
- The age and state of the CNC. Equipment overdue for replacement is deducted from the price. A 2007 router still earns, but a buyer should budget for its replacement.
- Staff and apprentices. Wetherill Park lists 13 staff, Springvale four plus the owner. Check awards, leave balances and who holds the trade licence, because Morisset requires the buyer to be a licensed builder, cabinet maker or carpenter.
Who buys these businesses
The listings suggest three kinds of buyer. The first is a tradesperson buying out the employer: Beaufort, Greater Sydney and Wetherill Park each mention a foreman, operator or staff who stay on, which suits a buyer who knows the work. The second is another joinery or shopfitting firm that wants the order book, the plant or a second site. The third is a builder who wants joinery in house and can feed the factory with its own jobs. Each buyer needs a different structure, and a tradesperson with no business assets to offer a lender faces the hardest road, which is why vendor finance appears on the Perth listing.
What you pay on top of the price
The asking price is rarely the cheque.
| Cost | What it is | Figure |
|---|---|---|
| Stock at valuation | Sheet, hardware and timber counted near settlement, paid on top of the price | Listings show about $100,000 (Maroochydore) |
| Work in progress | Jobs part built or deposits taken, often priced separately | Maroochydore lists WIP as extra, amount not disclosed |
| Lease assignment | Landlord consent and a new or assigned lease for the factory | Not published, ask the landlord in writing |
| Transfer duty | Depends on the state and how the contract splits goodwill, plant, stock and fixtures | See below |
| Legal and accounting | Solicitor for contract and lease, accountant to test profit against BAS and bank statements | Quote from your advisers |
Transfer duty depends on the state and the contract. Revenue NSW says goodwill, intellectual property and stock-in-trade are not dutiable, but fixtures, including built-in cabinetry, are always dutiable, lease assignments are dutiable, and goods are dutiable only when sold in an agreement that includes other dutiable property such as land. In Victoria, fixtures transferred with a non-dutiable lease attract no duty if their total value is $2 million or less. Other states differ, so get the split between goodwill, plant, stock and fixtures written into the contract, then ask your solicitor and accountant about duty and GST. We have not quoted duty on an example price.
Financing a joinery business purchase
Lenders are cautious about workshops. Value sits in used machines and in the owner's relationships, and both are hard to sell if the business fails. Savvy's October 2026 plant and machinery page says specialised equipment that is harder to value or sell costs more to finance, and used or older equipment may bring higher rates or a bigger deposit. Expect to fund a good share yourself. Plant is usually the easiest part to fund. Goodwill is harder, and a business built on one customer or one owner is harder again. What makes a deal fundable: two to three years of lodged accounts that match the BAS, profit that covers repayments after a market wage for you, a lease with real years left, a plant list with makes, models and ages, and a buyer with trade experience. Ventas is a broker, not a lender, so we do not quote rates here.
Illustrative only, subject to lender assessment. A realistic purchase at a $450,000 asking price:
| Item | Amount |
|---|---|
| Goodwill and order book | $190,000 |
| Plant and equipment (router, edgebander, panel saw, extraction) | $230,000 |
| Stock at valuation | $30,000 |
| Asking price | $450,000 |
| Legal, accounting and due diligence | $10,000 |
| Lease assignment and transfer costs | $3,000 |
| Working capital for wages, sheet stock and supplier terms | $60,000 |
| Total cash needed, before any transfer duty | $523,000 |
And how it is typically funded across lender types:
| Funding layer | Amount | What it covers | Secured on |
|---|---|---|---|
| Equipment finance | $140,000 | About 60 per cent of the plant | The machines, with a PPSR registration |
| Business acquisition loan | $150,000 | Goodwill, stock and costs | Business assets, personal guarantees, lease consent |
| Vendor finance, if the seller agrees | $60,000 | Part of the goodwill, paid over time | The business and the contract terms |
| Buyer funds or property-backed loan | $173,000 | The balance, including working capital | Cash, or equity in a property you own |
| Total | $523,000 |
Equipment finance is usually a chattel mortgage secured on the machines, and a used router or edgebander may be funded at a lower share than a new one. Our woodworking machinery finance page covers that layer, and our question on financing the stock and equipment when buying a business covers the rest. To get a number, send us the listing, two years of figures, the lease and the plant list through business acquisition finance. Tax treatment of the plant and any write-off depends on your circumstances, so ask your accountant.
- Bsale, Cabinetry Business, Carrum Downs VIC, listing 669158 ($149,990) (accessed 14 November 2026)
- Bsale, Established Kitchen Design and Cabinetry Business, Morisset NSW, listing 686681 ($190,000, turnover $800,000 plus, PEBITDA $240,000) (accessed 14 November 2026)
- Bsale, Established Kitchen and Custom Cabinetry Business, Springvale VIC, listing 686540 ($300,000, turnover about $1.3m, rent $4,807 a month) (accessed 14 November 2026)
- Bsale, Quality Custom Joinery Business, Greater Sydney NSW, listing 679903 ($300,000 plus SAV, turnover $1.5m to $2m) (accessed 14 November 2026)
- AnyBusiness, Quality Custom Joinery, Greater Sydney, business 3461382 (active, $300,000 plus SAV) (accessed 14 November 2026)
- Bsale, Premium Custom Cabinetmaker, Brisbane QLD, listing 683971 ($320,000 plus SAV) (accessed 14 November 2026)
- BusinessForSale, Reputable Custom Joinery Business, Beaufort VIC, listing DBH30003 ($395,000 plus SAV) (accessed 14 November 2026)
- Bsale, Cabinet Maker Joinery, South Australia, listing 685251 ($420,000 plus SAV, turnover over $850,000, page shows under contract) (accessed 14 November 2026)
- Bsale, High-end Custom Joinery Business, Hornsby NSW, listing 686205 ($530,000 plus SAV) (accessed 14 November 2026)
- AnyBusiness, Custom Made Furniture and Joinery Business, Wetherill Park NSW, business 3455919 ($690,000 to $750,000, 13 staff) (accessed 14 November 2026)
- Bsale, Established Perth Commercial Joinery Business, listing 675899 ($1,250,000 plus SAV, turnkey or going concern) (accessed 14 November 2026)
- BusinessForSale, Established Perth Commercial Joinery Business, listing DBH28257 (vendor finance may be considered) (accessed 14 November 2026)
- Bsale, Established and Profitable Coast Cabinetmakers, Maroochydore QLD, listing 676610 ($3,750,000 plus SAV plus WIP, revenue $2,982,011, PEBITDA $1,034,057) (accessed 14 November 2026)
- Bsale, Cabinet Making Factory, Welshpool WA, listing 677071 (marked sold, plant valued $169,388, used for plant context only) (accessed 14 November 2026)
- Business Sales, Joinery Business $200k Profit plus $1.2M Assets, Cairns QLD (marked sold, plant including CNC about $250,000, used for plant context only) (accessed 14 November 2026)
- Benchmark Business Sales, How To Value A Manufacturing Business (published 10 June 2025; 1.5x to 2.5x, 2.5x to 3.5x, plant and stock treatment) (accessed 14 November 2026)
- machines4u, LNC 1530 ATC router, Ravenhall VIC, listing 914928 (from $39,999 ex GST, 2025) (accessed 14 November 2026)
- machines4u, Biesse Rover A3 4.0 CNC flatbed router, Wynyard TAS, listing 1200155 ($28,500 ex GST, 2007) (accessed 14 November 2026)
- machines4u, Masterwood 38 x 18 flatbed nesting router, listing 264451 ($109,000 to $128,000 ex GST, 2022) (accessed 14 November 2026)
- machines4u, J C Walsh Woodworking Machinery, panel saws (Oltre PS315 4,450; SCM SC 3C 12,315; Toughcut CNC 22,726; SCM Nova SI 400ep 47,057; used SCM SI30N 11,900, all ex GST) (accessed 14 November 2026)
- machines4u, J C Walsh Woodworking Machinery, edgebanders (SCM ME20 $14,190, Toughcut Cobalt 25 $17,250, SCM ME22 $20,275 ex GST) (accessed 14 November 2026)
- Revenue NSW, Business purchases (goodwill, stock-in-trade not dutiable; fixtures and lease assignments dutiable) (accessed 14 November 2026)
- State Revenue Office Victoria, Fixtures and duty (no duty if fixtures total $2 million or less when assigned with a non-dutiable lease) (accessed 14 November 2026)
- Savvy, Plant and machinery finance (2 October 2026; specialised, used or older equipment can cost more or need a larger deposit) (accessed 14 November 2026)
This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.
Frequently asked questions
How much does it cost to buy a cabinet making business in Australia?
Live listings run from $149,990 for a small cabinetry workshop to $3.75m for a Sunshine Coast joinery manufacturer. Seven of 11 sit between $300,000 and $750,000. Add stock at valuation, legal and accounting costs, any transfer duty and working capital on top of the asking price.
How are joinery businesses valued?
Brokers use adjusted earnings, with the owner's wage added back. Benchmark Business Sales gives 1.5x to 2.5x for small owner-run manufacturers and 2.5x to 3.5x for established ones. Plant is usually inside the price and stock is paid on top. Listings are seller asking prices, not sale prices.
Is the CNC router included in the sale?
Often yes, but check. Several listings say machinery is included without listing it, and the Beaufort listing does not confirm it. Ask for a plant list with make, model, year and condition, and have it checked against the sale contract and any finance secured on the machines.
Can I finance a joinery business purchase?
Sometimes. Lenders are cautious about workshops because the value sits in used machines and the owner. Plant is the easiest part to fund, goodwill is harder, and most buyers contribute a large share. Finance is subject to lender assessment, and Ventas does not promise approval.
Do I need a licence to run a cabinet making business?
It depends on the state and the work. The Morisset listing requires the buyer to be a licensed builder, cabinet maker or carpenter because it includes installation. Check licensing with your state regulator before you sign, because a missing licence can stop you taking over the work.
Get your number from the lender panel
The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.
Buying a workshop?
Send us the listing, the last two years of figures and the plant list. We will come back with a structure, usually within a day.
This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.