Cost guides

What an office fit-out costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 12 November 2026

A standard tenant office fit-out in Australia runs about $1,500 to $2,500 per square metre, and a full or premium one $2,500 to $4,000, according to 2026 contractor price guides. Cushman and Wakefield puts capital city averages at $2,406 to $2,938. Meeting space, building condition and specification drive the spread.

$1,500 to $2,500per sqm, standard Cat B tenant fit-out (2026 contractor guides)
$2,406 to $2,938per sqm, capital city averages (Cushman and Wakefield, 2026)
$135,000 to $225,000a 100 sqm office on Melbourne standard rates (our arithmetic)
2% to 5%expected cost rise over the next 12 months (Knight Frank)

Office fit-out quotes can differ by a factor of three because the word covers very different jobs. A landlord may supply the base building, a builder may quote construction only, and furniture, data, design and make good can sit inside or outside the number. This guide lays out the published 2026 rates per square metre by tier and city, the cost lines that make them up, worked totals for a small, medium and large office, what moves the price, and how the project is usually funded. All figures are indicative market data from the sources listed, not Ventas offers.

What an office fit-out costs per square metre

Published 2026 cost guides split into two kinds. Property advisers (Cushman and Wakefield, JLL, Turner and Townsend, Knight Frank) publish city averages for corporate fit-outs. Contractor price guides publish tiered rates for ordinary tenant work. Read them together and the picture is steady: a standard tenant fit-out sits at roughly $1,500 to $2,500 a square metre, and a full or premium one at $2,500 to $4,000.

First, the tiered rates, all in Australian dollars per square metre. Cat A is the base building work a landlord usually supplies. Cat B is the tenant's own fit-out: partitions, ceilings, joinery, services, finishes. The three What's the Damage pages state GST is included; the Quote Yard page does not say.

Source and cityCat A or baseStandard Cat B or mid-rangeFull, premium or high-end
What's the Damage, Sydney (Nov 2026)$400 to $700$1,500 to $2,500 (typical $2,000)$2,500 to $4,000 (typical $3,000)
What's the Damage, Melbourne (Nov 2026)$360 to $625$1,350 to $2,250 (typical $1,800)$2,250 to $3,600 (typical $2,700)
What's the Damage, Brisbane (Nov 2026)$350 to $600$1,300 to $2,175 (typical $1,750)$2,175 to $3,475 (typical $2,600)
The Quote Yard, Perth (Jul 2026)$300 to $700 (speculative Cat A)$900 to $1,800$1,800 to $3,500
What's the Damage, national bands (Nov 2026)$400 to $700 (typical $525)$1,500 to $2,500 (typical $2,000)$2,500 to $4,000 (typical $3,000)
Amicus, national (Mar 2025)Not disclosed$1,500 to $2,000 (a 2025 hybrid workplace schedule used $1,750)Not disclosed

Adviser guides use a different yardstick: the average cost of a full corporate fit-out in each city. Here they are, with the Knight Frank figures in US dollars as published.

CityCushman and Wakefield 2026 (AUD per sqm)Knight Frank 2026 (USD per sqm)
Canberra$2,938Not disclosed
Brisbane$2,615$934
Sydney$2,599$1,334
Melbourne$2,535$1,300
Adelaide$2,406Not disclosed
Perth$2,406$934

Three more price points for the top end and the average. JLL puts the Australian average for a moderate, medium-quality fit-out at AU$3,011 a square metre (Q1 2026 data). Turner and Townsend lists Sydney at A$3,357 for low specification and A$7,221 for high specification, and Brisbane high specification at A$3,168. The gap between those two Sydney figures shows how much the brief matters. None of these guides define their tiers the same way, so compare ranges, not single numbers.

What separates basic, medium and high specification

The adviser averages and the contractor rates differ because they measure different jobs. A corporate fit-out for a large floor plate, with meeting rooms, acoustic treatment, tech-enabled spaces and furniture, costs more than a standard tenant fit-out of an open-plan floor with a kitchenette. Cushman and Wakefield's guide sets out what moves a job between its three tiers.

SpecificationMeeting spaceOther features Cushman and Wakefield lists
Basic (low)Under 10% of floor areaLow-spec finishes and carpet, paint to walls, ceiling alterations under 25%, minimal sustainability certification
Medium (collaborative)About 10% to 20%Several data points per desk, plasterboard ceilings to meeting rooms, minimal air-conditioning changes, low to medium acoustic management
High (advanced)Over 25%, with double-glazed partitionsFeature finishes, high-spec carpet, dedicated heating and cooling, tech-enabled spaces, ceiling alterations over 25%

That guide, using December 2025 data, gives US dollar rates per square foot for Australian cities. Sydney is US$107 basic, US$161 medium and US$268 high. Melbourne is US$104, US$157 and US$262. Brisbane is US$108, US$162 and US$270. The page text was hard to map to its columns, so treat the tier order as our reading of it. In US dollars per square metre, our arithmetic (multiplying by 10.764, no currency conversion) gives Sydney about 1,152, 1,733 and 2,885.

The jump from medium to high is about 65 per cent in every one of these cities. JLL names enclosed spaces and focus pods, with their partitions, acoustics, air-conditioning and technology, as a key cost driver, which fits the meeting-space jump in the top tier.

Where the money goes, line by line

A per-square-metre rate hides what you are buying. These are the cost lines as priced by two contractor guides, in dollars including GST, with the typical figure in brackets.

Cost lineSydney (Nov 2026)Melbourne (Nov 2026)
Strip-out to base building, incl. disposal$30 to $150 per sqm ($50)$27 to $135 per sqm ($54)
Plasterboard partitioning$120 to $225 per sqm ($175)$108 to $203 per sqm ($159)
Glazed office partitioning$500 to $1,400 per linear m ($800)$450 to $1,260 per linear m ($720)
Suspended ceiling, supply and install$50 to $150 per sqm ($100)$45 to $135 per sqm ($90)
Services upgrade (mechanical, power, data)$200 to $450 per sqm ($300)$180 to $405 per sqm ($270)
Joinery package (reception, kitchenette, storage)$10,000 to $29,950 per job ($19,950)$9,000 to $27,000 per job ($18,000)
Workstation furniture module$1,200 to $5,100 each ($2,500)$1,080 to $4,590 each ($2,250)
Concept design and feasibility$3,000 to $19,950 per report ($8,000)$2,700 to $18,000 per report ($7,200)

The Quote Yard adds percentages for Perth: design and documentation at 5 to 12 per cent of the build, project management at 5 to 10 per cent, and a design compliance and permit line of $2,500 to $15,000. It also lists asbestos removal at $3,000 to $45,000 for older buildings, which can sit outside a tidy per-metre rate.

JLL's Australia and New Zealand split of a fit-out budget is useful for sense-checking quotes: builders' works 50 per cent, mechanical and electrical services 20 per cent, security, IT and AV 14 per cent, furniture, fittings and equipment 11 per cent, professional services 4 per cent. These are shares of a corporate fit-out, so a smaller office with more furniture will look different.

Worked totals for a small, medium and large office

Using the Melbourne rates (GST included) for a standard Cat B fit-out, our arithmetic gives these totals. Make good uses the Melbourne typical of $135 a square metre, which is a separate cost at lease end.

Office sizeStandard Cat B rangeAt the $1,800 typical rateMake good at $135
Small, 100 sqm$135,000 to $225,000$180,000$13,500
Medium, 300 sqm$405,000 to $675,000$540,000$40,500
Large, 1,000 sqm$1,350,000 to $2,250,000$1,800,000$135,000

What's the Damage prices a 200 square metre mid-range Cat B office at $270,000 to $450,000, about $360,000 at the typical rate, which agrees with the table. Check what a rate includes. The Melbourne guide says electrical beyond the services upgrade, flooring, painting, permits and project management need separate quotes, and one quote may be construction only while another is turnkey with design and furniture.

Make good varies more than most lines. Sydney is listed at $80 to $350 a square metre, Melbourne at $70 to $315 (the same page also quotes $135 to $585, so confirm by quote), and Perth at $150 to $500. Cushman and Wakefield's reinstatement averages are $420 a square metre in Sydney and Melbourne and $436 in Brisbane. Make good is worth reading in the lease before you sign.

What moves the price

Buyers are mostly professional firms, medical and allied health practices fitting out admin and consulting space, and growing businesses signing a new lease. A clinic with treatment rooms prices differently from an office; see the medical practice fit-out cost guide. For build costs generally, see construction cost per square metre.

Financing an office fit-out

Lenders treat an office fit-out cautiously. Most of the spend, partitions, ceilings, services and joinery, is fixed to a building you do not own, so it has little resale value if the business fails. Funding therefore leans on the business's cashflow, the term left on the lease and what you can offer as security. Some lenders will not fund fit-out at all. Ventas is a finance broker, not a lender, and we do not quote rates, which change with the lender and the file. Read how to finance an office fit-out and, for a short lease, what happens if the lease is short.

Illustrative only, subject to lender assessment. A 300 square metre office, mid-range, for a growing professional firm:

ItemAmount
Partitions, ceilings, flooring, joinery and services$380,000
Data, security and AV$55,000
Furniture, 30 workstations at $2,250$67,500
Design, documentation and project management$35,000
Permits, certification and contingency$25,000
Total project cost, before any GST treatment$562,500

And how it is typically funded across lender types:

Funding layerAmountWhat it coversSecured on
Equipment finance$122,500Furniture, data and AVThe equipment itself
Fit-out or business loan$300,000Construction and servicesBusiness cashflow, director guarantees, sometimes property
Landlord contribution, if negotiated$100,000Part of constructionThe lease
Your cash$40,000Design, permits and the balanceNot applicable
Total$562,500

Movable items fund most easily because the lender can value the goods. The construction loan should not run longer than the lease. A lender may also want the landlord's consent and a personal guarantee. A property-backed loan can fund the whole project against a home or other property, with the usual risk to that property. How fit-out costs are treated for tax is a question for your accountant.

What makes a fit-out fundable: a signed lease with a term at least as long as the loan, a builder's fixed-price quote, two years of financials, and cash in the deal. To get a number from Ventas, send the floor area, the quote, the lease term and options, and the business's last two years of results. Start at fit-out finance. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does an office fit-out cost per square metre in Australia?

2026 contractor guides price a standard tenant (Cat B) fit-out at about $1,500 to $2,500 a square metre and a full or premium one at $2,500 to $4,000. Cushman and Wakefield's city averages run from $2,406 in Adelaide and Perth to $2,938 in Canberra. The brief, density and building condition set where a job lands.

What is the difference between Cat A and Cat B?

Cat A is the base building work, usually supplied by the landlord: ceilings, basic lighting, services. Cat B is the tenant's own fit-out on top: partitions, joinery, finishes, data, and often furniture. What's the Damage lists Cat A at about $400 to $700 a square metre in Sydney, against $1,500 to $2,500 for a standard Cat B.

How much does it cost to fit out a 100 square metre office?

On Melbourne rates for a standard Cat B fit-out, our arithmetic gives $135,000 to $225,000, or about $180,000 at the $1,800 typical rate. Add furniture and design if the quote excludes them, and allow for make good at the end of the lease, typically around $13,500 at $135 a square metre.

Who pays for make good at the end of an office lease?

The lease decides, and the tenant usually carries it. Published rates range from $70 to $350 a square metre in Melbourne and Sydney and $150 to $500 in Perth. Read the make good clause before signing, and consider setting money aside from the start rather than meeting the bill at lease end.

Can you finance an office fit-out?

Yes, but lenders are cautious because fixed work in a leased building has little resale value. Furniture, data and AV fund most easily through equipment finance. Construction costs usually need a business loan matched to the lease term. Lender assessment applies and some lenders decline fit-out altogether.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

The fit-out, then the finance

Tell us the floor area, the quote and the lease term. We will come back with a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →