Finance question

Can I get finance for a press brake?

Yes. A press brake is usually financed as equipment finance secured on the machine, and a new machine from a dealer is the simplest deal. Used, privately bought or imported machines are valued lower and some lenders decline them. Approval depends on the business, the machine and the invoice, and is subject to lender assessment.

Up to $500K 24 to 48 hour approvals 40+ lenders

Get your free rate quote

Tell us a few details and we will come back with your indicative rate. No obligation.

Please enter your first name.
Please enter your last name.
Please enter a valid email.
Please enter a valid phone number.
Please select an asset type.

No obligation, and no impact on your credit to enquire.

Thanks, we are on it

Your enquiry is in. Our team will be in touch shortly with your indicative rate and next steps.

The short answer

The machine is the security, so the invoice matters

Fabrication shops, manufacturers bringing bending in house and trailer and body builders are the usual buyers, and most fund the machine through a chattel mortgage or commercial hire purchase. The press brake itself is the security, which is why equipment finance can often run without full financials, on low-doc terms, with approvals commonly back in 24 to 48 hours. What the lender wants most is a clear supplier invoice naming the make, model, tonnage and serial number.

Price is the first thing to pin down, because two machines of the same bed length can be $59,550 apart (our arithmetic). The press brake guide lists new machines from $29,450 for a 70 tonne, 3200 mm NC machine to $276,500 for a 250 tonne, 4.3 metre CNC machine, ex GST. A 135 tonne, 3200 mm NC machine asks $41,450 while a 160 tonne, 3200 mm CNC with a Delem control asks $101,000, and used machines run from $9,995 to $95,000 (press brake cost guide). Tooling is extra: a 4000 mm knife top punch asks $2,695 before a second set.

Where the machine comes from changes the finance. A dealer sale with a tax invoice, delivery and installation is the cleanest. A used press brake sold as is, with no hours shown, is valued on what the lender can verify, so a deposit may be asked for. Ventas is a broker across 40+ lenders, not a single bank, and there is no upfront fee to you; the lender pays us on settlement. We match the machine to the lender that is comfortable with that kind of asset.

Do you qualify?

What a lender looks at on a press brake purchase.

A supplier invoice

Make, model, tonnage, serial number and the GST position stated clearly.

New or used

Dealer-supplied new machines are simplest, used and imported ones are assessed harder.

Trading history

An ABN with some history helps, and low-doc terms are often available.

Deposit and extras

Tooling, rigging, delivery and power are costs a deposit may need to cover.

Why financing a press brake works

01

The asset secures it

The machine is the security, so property is not usually needed.

02

Cashflow stays free

Payments are spread while the machine earns from the first bend.

03

Used machines can work

Some lenders fund older machines, with the age and condition assessed.

A worked example

A fabrication shop buys the 160 tonne, 3200 mm CNC press brake at $101,000 ex GST and adds a $2,695 knife top punch. It pays a $20,000 deposit from savings, and a chattel mortgage covers the remaining $81,000 for the machine, with the tooling funded from working capital. Illustrative only.

Get my rate quote

Common questions

Frequently asked questions

Can I finance a used press brake?

Often yes, though lenders value used and privately sold machines lower and some decline them. Most used listings show no hours and are sold as is, so expect the lender to ask for an inspection or a larger deposit.

What does a new press brake cost in Australia?

Twelve new machines listed in November 2026 ask $29,450 to $276,500 ex GST. Add tooling, delivery, rigging, power and training on top of the asking price.

Do I need financials to finance a press brake?

Not always. Equipment finance often runs low-doc or no-doc because the machine is the security, subject to lender assessment and the strength of the deal.

Can I finance the tooling with the machine?

Sometimes. Tooling quoted on the same supplier invoice can often be included. A separate tooling purchase from another seller may need its own invoice or be paid from working capital.