What a press brake costs in Australia
New press brakes are listed in Australia from $29,450 for a 70 tonne, 3200 mm NC machine to $276,500 for a 250 tonne, 4.3 metre CNC machine, ex GST. Most shop machines of 135 to 230 tonnes ask $41,000 to $160,000. Tonnage, bed length, controller and brand set the price. Used machines start under $10,000.
A press brake is priced on how much force it applies, how long a part it takes, what controls the backgauge and who built it. That is why two 3200 mm machines can ask $41,450 and $101,000. This guide sets out 17 live Australian listings, new and used, across Victoria, New South Wales, Queensland and Western Australia, what separates a basic NC machine from a CNC one, the tooling, delivery, rigging and power costs the advertised price leaves out, and how fabrication shops fund the purchase. The buyers are mostly sheet metal and fabrication shops, manufacturers bringing bending in house, and trailer and body builders.
What new press brakes cost in Australia
Prices below are the sellers' own asking prices, ex GST, on machines4u.com.au listings opened on 12 November 2026, with the listing ID in brackets. They are indicative market data and not Ventas offers. "Not disclosed" means the listing does not show the field. If you are also pricing other sheet metal equipment, see our guides to the cost of a CNC machine, and the finance pages for a laser cutter and a CNC machine.
| New listing | Capacity, bed and controller | Where | Asking price ex GST |
|---|---|---|---|
| Metalmaster PB-70E (machines4u 691679) | 70 t x 3200 mm, Estun NC-E21, 2 axis | Dealer, stores in NSW, VIC, QLD, WA, SA | $29,450 |
| Metalmaster PB-135B (994761) | 135 t x 3200 mm, Estun NC-E21, 2 axis, laser guarding | Dealer, stores in NSW, VIC, QLD, WA, SA | $41,450 |
| Metalmaster PB-200B (903895) | Title 200 t x 4000 mm (specs say 220 t), Estun NC-E21, 2 axis | Dealer, stores in NSW, VIC, QLD, WA, SA | $58,950 |
| Asset Industrial 220-4000CNC2 (697569) | 220 t x 4000 mm, iCon 2-axis graphical, 2026 | Dandenong South, VIC | $72,850 |
| Tanshu hydraulic 160 t (1254301) | 160 t x 4000 mm, Delem DA-53T, up to 4 axes | Bligh Park, NSW | $74,335 |
| Accurl Euro Pro (682738) | 135 t x 4000 mm, Delem DA-53S, 5 axis | Brisbane, QLD (NSW by appointment) | From $87,000 |
| Harsle electro-hydraulic (1097178) | 160 t x 3200 mm, Delem DA-53T, title 4+1 axis, 36 month warranty | Hallam, VIC | $101,000 |
| Dener DDM4015 eBrake, demo (1113276) | Fully electric, 40 t x 1530 mm, Delem DA-66T, 4 axis. Was $119,000 | Dandenong, VIC | $106,500 |
| JFY TPM8 (1096684) | 150 t x 3100 mm, touch screen controller, free delivery advertised | Sydney, NSW | $135,000 |
| Farley 4 m (1005832) | 210 t x 4000 mm, Delem DA-66T, 6+1 axis, installation and training, 12 month warranty | Sunshine West, VIC | $154,000 |
| Han's HBS (1182561) | 230 t x 4100 mm, Delem DA-58TX, 4+1 axis | Moorabbin, VIC | $159,000 |
| HACO EMS43250-4A (939607) | 250 t x 4300 mm, FastBEND-2D Premium, 7 axes, manufacturer installation | Cockburn Central, WA | $276,500 |
Three things stand out. The 12 new machines span $29,450 to $276,500, and two machines of the same size can be $100,000 apart: the Metalmaster PB-135B asks $41,450 for 135 tonnes and 3200 mm, while the Harsle asks $101,000 for 160 tonnes and 3200 mm. The cheaper machine has a 2 axis NC control with a short backgauge, the dearer one a Delem touch screen CNC with more axes and a 36 month warranty. Second, listings do not agree with themselves: the PB-200B title says 200 tonnes but its specification says 220, and the Harsle title says 4+1 axis while its description says 6 axis. Ask the dealer to confirm in writing. Third, the biggest machine is the only WA listing here, so check freight to your state before you compare a Victorian price with a Queensland one.
What used press brakes cost
Used press brakes are scarce on the marketplace, and the five below are all that were clearly described on the first two pages of machines4u results. None shows hours. Used machines are mostly sold as is.
| Used listing | Year | Capacity and bed | Controller | Where | Asking price ex GST |
|---|---|---|---|---|---|
| Hydrabend, Australian made (1199542) | Not disclosed | Not disclosed | Not disclosed | Dandenong South, VIC | $9,995 |
| Pearson hydraulic (635742) | Not disclosed | Not disclosed (description says 8 metres) | Not disclosed | Charlton, QLD | $28,000 |
| HACO ERM 25100 (1280288) | 2014 | 100 t x 2500 mm | HACO FastBEND-2D | Kingsgrove, NSW | $69,500 |
| Durma (1281388) | Not disclosed | 400 t x 6000 mm | Cybelec DNC 880S, Y1 Y2 X R and crowning | Mona Vale, NSW | $70,000 |
| LVD PPEB 220/61 (1291031) | 2010 | 220 t x 6100 mm | LVD Cadman Touch, 8 or 9 axes | Hallam, VIC | $95,000 |
Age and brand carry more weight than the tonnage on a used machine. The 2014 HACO 100 tonne x 2500 mm asks $69,500 and is still in production use, with removal expected in December 2026 or January 2027, and removal and transport are the buyer's job. The 400 tonne x 6000 mm Durma at $70,000 is the cheapest tonnage per dollar here, but it needs a bay, a crane and a lot of material to justify it. At the other end, a Hydrabend at $9,995 and a Pearson at $28,000 show no tonnage, control or year, so a buyer cannot price them against anything until an inspector has looked. Compare one new machine such as the Metalmaster PB-135B at $41,450 with the 2014 HACO: the used machine has a better-known control but costs 68 per cent more, our arithmetic. Used is not automatically cheaper.
What moves the price
Tonnage, bed length, the controller and its axes, and brand set the price. The next table groups the listings above by capacity.
| Capacity band | Asking price ex GST | What moves it within the band |
|---|---|---|
| Up to 90 t, 2 axis NC, 3200 mm | $29,450 (70 t) to $44,850 (90 t) | Dealer stock, Estun or iCon control |
| 125 to 160 t, 3000 to 4000 mm, 2 axis or Delem DA-53 class | $41,450 to $101,000 | The low end is a 2 axis NC machine, the high end has a 3 or 4 axis backgauge |
| 200 to 230 t, 4000 mm | $58,950 to $159,000 | Same length and tonnage, price follows controller, axes and brand |
| 250 t and over, 4300 mm, 7 axes | $276,500 | One WA listing in this set |
| Electric, small bed | $106,500 (40 t x 1530 mm, demo) | Fewer tonnes per dollar, built for small precise parts |
Dividing price by tonnes shows how steeply the price climbs with controller and brand, our arithmetic from the listings above:
| Machine | Asking price ex GST | Tonnage | Price per tonne |
|---|---|---|---|
| Metalmaster PB-135B | $41,450 | 135 t | $307 |
| Harsle 160 t | $101,000 | 160 t | $631 |
| Han's HBS | $159,000 | 230 t | $691 |
| HACO EMS43250-4A | $276,500 | 250 t | $1,106 |
Tonnage is the force the machine can apply, and it sets the thickest and hardest material you can bend over a given length. Bed length sets the longest part. Tonnage required rises with thickness and falls with a wider die opening, so ask a dealer to size it to your job mix instead of buying the biggest machine. Backgauge axes decide how many bends you can do per setup: a 2 axis machine positions the stop in and out and up and down, a 5 to 7 axis machine also moves fingers sideways and in height for stepped parts. Hydraulic against electric: hydraulic machines give the most tonnes per dollar, while the one electric listing here (Dener eBrake, 40 tonnes, 1530 mm) asks $106,500. Brand and support: a local service team and spare parts matter when you resell or finance the machine.
What you pay on top of the machine
The asking price is rarely what leaves the account. These items sit on top, and a lender will want them in the quote.
| Cost | What the sources show | Figure |
|---|---|---|
| Tooling beyond the starter set | Dealer listings often include a basic punch and die. A 35 degree double-edge knife top punch from Steelmaster lists at $525 for 800 mm, $2,295 for 3200 mm and $2,695 for 4000 mm ex GST (listing 72453). Specialist and quick-change sets cost more | Plan $3,000 to $10,000 for a second set, our arithmetic from tooling listings |
| Delivery and rigging | Several listings say delivery is free or national, others say delivery to site and unloading is extra (Farley, 1005832). A 12 to 25 tonne Franna lists at about $170 to $230 an hour wet hire on the Gold Coast (iseekplant, 19 May 2026) | Ask for delivered and placed price in writing |
| Installation and commissioning | Included at Farley and HACO WA. Not stated at Asset Industrial, Harsle, JFY or Tanshu. Exapress states prices exclude delivery and installation | Not published, get a quote |
| Power and floor | Metalmaster PB-70E lists a 7.5 kW motor at 415 V and about 5,000 kg net weight. Larger machines weigh more and may need a slab check | An electrician and a slab check, cost not published |
| Guarding and training | WorkSafe WA says the sides and rear of a brake press must always be guarded and no one should operate one unless properly trained. Light guarding is generally limited to hydraulic presses | Laser guarding is included on several dealer listings |
| Offline software | Harsle lists Profile-53TL offline software, Asset Industrial lists offline software | Check whether it is included |
In the worked example below, tooling, rigging, power and training add $18,000 to a $101,000 machine, our arithmetic. Your figure will differ, so get each item quoted before you sign. Prices here are ex GST, so a GST-registered buyer pays 10 per cent on top and claims it back through the BAS. Ask your accountant how depreciation and any tax deduction apply to your business.
Financing a press brake
Press brakes are standard equipment finance. A new machine from a dealer is simple: the machine is the security, the invoice sets the value, and it resells because other shops buy the same models. That said, lender appetite is not equal across the table. Machines from known dealers with a local service team are the easiest. Used machines bought privately, machines imported by the buyer, and brands with no local spare parts are valued lower, and some lenders will not fund them at all. Lenders also look at the business: trading history, how much the machine adds to revenue, and whether bending work is already coming in.
Ventas is a finance broker, not a lender, and we do not quote rates here. They vary by lender, asset age, term and the business.
Illustrative only, subject to lender assessment. A new CNC press brake bought by a fabrication shop at the Harsle asking price:
| Item | Amount ex GST |
|---|---|
| Press brake, 160 t x 3200 mm, Delem CNC | $101,000 |
| Second tooling set | $6,000 |
| Delivery and rigging | $4,500 |
| Electrical connection and slab check | $5,000 |
| Guarding upgrades and operator training | $2,500 |
| Total to fund | $119,000 |
And how it is typically funded:
| Funding layer | Amount | What it covers | Secured on |
|---|---|---|---|
| Equipment finance (chattel mortgage or finance lease) | $95,000 | The machine and part of the tooling | The press brake itself |
| Your deposit or working capital | $24,000 | Rest of tooling, installation costs and training | Cash, or an existing facility |
| Total | $119,000 |
Debt here is about 80 per cent of the cost. Lenders often fund the machine and the tooling that is itemised on the invoice, and treat electrical work and training as the buyer's cost. A trade-in, a deposit or a balloon changes the numbers, and a business that already owns property can also use a property-backed loan for the gap.
To get a number from Ventas, send the dealer quote or the listing link, the machine age and make, the delivered and installed price, two years of financials or your latest BAS, and what the machine will earn. Start at metal fabrication finance or equipment finance. If you are buying the whole shop instead, read buying a manufacturing business. Finance is subject to lender assessment and approval.
- machines4u, press brakes search results, pages 1 and 2 (540 results, listings opened individually) (accessed 12 November 2026)
- machines4u, Metalmaster PB-70E 70T x 3200mm, listing 691679 ($29,450 ex GST, Estun NC-E21, 2 axis, Hare & Forbes) (accessed 12 November 2026)
- machines4u, Metalmaster PB-135B 135T x 3200mm, listing 994761 ($41,450 ex GST, Estun NC-E21, 2 axis) (accessed 12 November 2026)
- machines4u, Metalmaster PB-200B 200T x 4000mm, listing 903895 ($58,950 ex GST, spec says 220 t) (accessed 12 November 2026)
- machines4u, Asset Industrial 220T x 4000mm CNC, listing 697569 ($72,850 ex GST, iCon 2 axis, Dandenong South VIC) (accessed 12 November 2026)
- machines4u, Tanshu hydraulic press brake 160T x 4000mm DA53T, listing 1254301 ($74,335 ex GST, NSW) (accessed 12 November 2026)
- machines4u, Accurl Euro Pro 135T x 4000mm, listing 682738 (from $87,000 ex GST, Delem DA-53S, 5 axis, QLD) (accessed 12 November 2026)
- machines4u, Harsle electro-hydraulic 160T x 3200mm, listing 1097178 ($101,000 ex GST, Delem DA-53T, 36 month warranty, Hallam VIC) (accessed 12 November 2026)
- machines4u, Dener DDM4015 eBrake demo machine, listing 1113276 ($106,500 ex GST, was $119,000, fully electric 40T x 1530mm) (accessed 12 November 2026)
- machines4u, JFY TPM8 150T x 3.1m, listing 1096684 ($135,000 ex GST, Sydney NSW) (accessed 12 November 2026)
- machines4u, Farley 4m 210T 6+1 axis DA66T, listing 1005832 ($154,000 ex GST, installation and training included, delivery to site extra) (accessed 12 November 2026)
- machines4u, Han's HBS CNC 230T x 4100mm, listing 1182561 ($159,000 ex GST, Moorabbin VIC) (accessed 12 November 2026)
- machines4u, HACO EMS43250-4A CNC 250T x 4.3m, listing 939607 ($276,500 ex GST, Cockburn Central WA, manufacturer installation) (accessed 12 November 2026)
- machines4u, Exapress EPB electric press brake 35T x 1600mm, listing 866713 (was $72,000, now $59,990 ex GST, prices exclude delivery and installation, description inconsistent) - not tabled (accessed 12 November 2026)
- machines4u, used Hydrabend pressbrake, listing 1199542 ($9,995, Dandenong South VIC, sold as is) (accessed 12 November 2026)
- machines4u, used Pearson hydraulic press brake, listing 635742 ($28,000 ex GST, Charlton QLD) (accessed 12 November 2026)
- machines4u, used 2014 HACO ERM 25100 100T x 2500mm, listing 1280288 ($69,500 ex GST, Kingsgrove NSW, removal December 2026 or January 2027) (accessed 12 November 2026)
- machines4u, used Durma 6m 400T press brake, listing 1281388 ($70,000 ex GST, Cybelec DNC 880S, Mona Vale NSW) (accessed 12 November 2026)
- machines4u, used 2010 LVD PPEB 220/61 press brake, listing 1291031 ($95,000 ex GST, Cadman Touch, Hallam VIC, as is where is) (accessed 12 November 2026)
- machines4u, Steelmaster knife top punch 120mm tooling, listing 72453 (35 degree, 800 mm $525 to 4000 mm $2,695 ex GST) (accessed 12 November 2026)
- WorkSafe WA, Brake presses (sides and rear always guarded, light guards generally hydraulic presses only, operators must be trained) (accessed 12 November 2026)
- iseekplant, Crane Hire Rates Gold Coast Project Cost Guide (19 May 2026; Franna 12 to 25 tonne wet hire about $170 to $230 an hour) (accessed 12 November 2026)
This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.
Frequently asked questions
How much does a press brake cost in Australia?
Twelve new machines on machines4u in November 2026 ask $29,450 to $276,500 ex GST. A 135 tonne x 3200 mm NC machine asks $41,450, and a 160 tonne CNC with a Delem control asks $101,000. Add tooling, delivery, rigging, power and training on top.
How much is a used press brake?
Five used listings range from $9,995 for an Australian-made Hydrabend to $95,000 for a 2010 LVD 220 tonne x 6100 mm. A 2014 HACO 100 tonne x 2500 mm asks $69,500. Most show no hours and are sold as is, so inspect under power before you buy.
What size press brake do I need?
It depends on material thickness, material type and the longest part. Tonnage required rises with thickness and falls as the die opening widens. Most listings here are 3200 mm or 4000 mm. Ask a dealer to size it against your job mix instead of buying the biggest machine.
Is a CNC press brake worth more than an NC one?
Usually yes. In the listings, a 135 tonne 2 axis NC machine asks $41,450, while CNC machines with Delem controls and several backgauge axes ask roughly $87,000 to $159,000. The extra axes cut setups on complex parts. For simple single bends the cheaper control may be enough.
Can I finance a press brake?
Yes, usually as equipment finance secured on the machine. New machines from a dealer are the simplest. Used, privately bought or imported machines are valued lower and some lenders decline them. Approval depends on the business, the machine and the invoice, and finance is subject to lender assessment.
Get your number from the lender panel
The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.
The machine, then the finance
Send us the quote or the listing and the machine age. We will come back with a structure, usually within a day.
This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.