What a retail shop fit-out costs in Australia
A retail shop fit-out in Australia typically costs about $800 to $2,800 per square metre, and flagship work runs $2,800 to $5,000 or more. Published 2026 city guides put the typical shopfit at $1,600 to $2,000 per square metre. Shopfront, joinery, shopping centre rules and the state of the shell drive the spread.
Two shops of the same size can cost $80,000 or $350,000 to fit out. The difference is the finish level, the shopfront, whether the shell is bare or stripped, and whether the shop is in a centre with its own design rules. Cost publishers and shopfitters now post rates by city and by quality, and they agree more than you might expect. This guide sets out those rates for Sydney, Melbourne, Brisbane, Adelaide and Perth, the cost lines inside a fit-out, worked totals for a small, medium and large shop, what moves the price, and how a fit-out is financed.
What a retail fit-out costs per square metre
This page is about retail shops: strip shops, high street tenancies and shopping centre specialty stores. Cafes and offices price differently, so see our cafe fit-out guide and office fit-out guide. The cleanest 2026 comparison is a set of city cost guides updated in November 2026. They quote a low, typical and high rate per square metre for retail shopfitting. They are estimates from cost-data publishers, not quotes, so treat them as a starting budget. Sydney, Brisbane, Adelaide and Perth figures state GST-inclusive. Melbourne does not state a GST basis.
| City (all prices per square metre) | Low | Typical | High | GST basis |
|---|---|---|---|---|
| Sydney, NSW | $1,000 | $2,000 | $2,750 | Includes GST |
| Melbourne, VIC | $900 | $1,800 (page's own worked example) | $2,475 | Not stated |
| Brisbane, QLD | $870 | $1,725 | $2,400 | Includes GST |
| Adelaide, SA | $800 | $1,600 | $2,200 | Includes GST |
| Perth, WA | $915 | $1,825 | $2,500 | Includes GST |
Every city lands close together: typical rates run from $1,600 in Adelaide to $2,000 in Sydney. The Brisbane page says its rate covers joinery, display fixtures, counters, lighting, flooring and finishes, and that shopfront and signage should be a separate line in your quote. Melbourne's page describes the top of its range as premium or brand-led shopfit. Take the rate as the inside of the shop and price the front on top.
Basic, mid range and high end retail
Two Australian shopfitting pages split the market by finish level instead of by city. Both are shopfitter estimates for 2026, and neither states whether GST is included.
| Finish level (per square metre) | Perth and regional WA (The Quote Yard) | South Australia (The Quote Yard) |
|---|---|---|
| Basic retail | $800 to $1,500 | $800 to $1,500 |
| Mid range retail | $1,500 to $2,800 | $1,500 to $2,800 |
| High end or flagship retail | $2,800 to $5,500 | $2,800 to $5,000 |
| Published | 28 July 2026 | 20 September 2026 |
The Perth page describes a basic retail fit-out as shelving, a counter, lighting and finishes, and the top tier as flagship stores. At the extreme end, an airport study by cost consultancy WT Partnership covers more than $110 million of fit-out across 13,500 square metres of delivered airport retail. That works out at about $8,148 per square metre (our arithmetic), but the study mixes duty free, food and specialty stores and does not state a GST basis on its public page. It says airport fit-outs carry significant premiums over CBD and high street projects. It is not a benchmark for a normal shop.
Worked totals for a small, medium and large shop
Multiplying the published tier rates by floor area gives a rough budget. This is our arithmetic on the two Quote Yard tier ranges above. It covers the shopfitter's rate only, so add the shopfront, signage and design lines below where your quote prices them separately.
| Shop size | Basic ($800 to $1,500) | Mid range ($1,500 to $2,800) | High end ($2,800 to $5,000) |
|---|---|---|---|
| 50 square metres | $40,000 to $75,000 | $75,000 to $140,000 | $140,000 to $250,000 |
| 100 square metres | $80,000 to $150,000 | $150,000 to $280,000 | $280,000 to $500,000 |
| 250 square metres | $200,000 to $375,000 | $375,000 to $700,000 | $700,000 to $1,250,000 |
A 50 square metre mall kiosk or boutique on a mid range finish lands around $75,000 to $140,000. A 100 square metre strip shop sits between $80,000 and $500,000 depending on the finish, which is why the quality brief matters more than the size. A 250 square metre store is where a landlord contribution or a staged opening starts to matter.
Where the money goes, line by line
The per square metre rate hides several big lines. These are the ones shopfitters publish. They come from different pages and different states, so they do not add up neatly to a total.
| Cost line | Published figure | Other published figure or note |
|---|---|---|
| Shopfront and glazing | $15,000 to $60,000, outside the per square metre rate (SA, Sept 2026) | $1,200 to $3,500 per linear metre (Perth, July 2026) |
| Joinery, counters and shelving package | $10,000 to $80,000 (SA) | Melbourne page: usually the largest single trade cost, no figure |
| Signage package | $2,500 to $25,000 (WA) | Not priced separately in Brisbane |
| Centre design approval | $1,500 to $8,000, 3 to 8 weeks (WA). May include design review, services connection and administration charges | Strip shops generally avoid it |
| Strip out of the previous fit-out | $80 to $250 per square metre (SA) | $26 to $130 per square metre including disposal (Brisbane) |
| Services upgrade: power, mechanical, data | $175 to $390 per square metre (Brisbane) | Older shells may need a new switchboard first (Sydney page) |
| Make good at lease end | $200 to $600 per square metre (WA retail), or $15,000 to $100,000 (SA) | $65 to $350 per square metre across city guides, general commercial rates, not retail only |
Make good is the line people forget. The published ranges overlap and some are general commercial rates. Read the lease clause before you sign, because it decides whether you owe a bare shell, a repaint or a full strip out.
What moves the price
Shopping centre or strip shop. Melbourne's page says centre fit-outs usually cost more because of centre management approvals, after-hours labour premiums, and charges for hoarding, dilapidation inspections, inductions, security escorts and waste handling. It gives no separate centre rate. The Perth page adds that much retail fit-out labour happens outside normal hours and carries a premium. Vicinity's Chadstone Market Pavilion fit-out criteria define Category One works as changes to base building or centre services needed for your design, done by the landlord's contractor at the tenant's cost, and sprinkler changes to suit your layout are also at the tenant's cost. Region Group's fit-out guide says the same about fire and mechanical services changes, which its own contractors do at the tenant's cost, and it puts design approval about week 5 of a six step process. Strip tenancies avoid most of that, though Unita, a shopfitter, notes that development applications, fire safety, hydraulics and heritage compliance all have long lead times. The Melbourne page warns that an older strip shop needing upgrades for a change of use can cost more than the fit-out itself.
The state of the shell. A cold shell needs everything. A shop with a previous fit-out needs a strip out first. Sydney's page flags floor levelling and a new switchboard on older shopfronts before joinery and lighting go in.
Landlord contribution. Melbourne's page says fit-out contributions are more available where vacancy is higher. Whether you pay for landlord works is also a lease disclosure issue. Clayton Utz's state comparison, current at 1 January 2025, says in NSW a clause requiring the tenant to pay toward fit-out items is void unless disclosed, and WA applies similar rules to new leases. Victoria's Small Business Commission says the landlord must give you the lease and a disclosure statement at least 14 days before you enter it, and that you should understand your obligation to restore the premises to its original state at the end of the lease (make good) and what it will likely cost. Queensland's Small Business Commissioner says the statement is due at least seven days before signing, and suggests asking for a condition report with photos signed by both sides. Ask for the contribution, the disclosure statement and the make good scope in writing before you sign.
Location and trading hours. The Perth page lists regional mobilisation costs, centre rules and after-hours access as price drivers. Melbourne lists copper costs, imported plant and tariffs, and CBD access as well.
Financing a retail shop fit-out
A fit-out is hard to finance because most of it is built into someone else's building. Joinery, painting and the shopfront cannot be resold, so a lender cannot recover much if the shop closes. Lenders therefore look at the lease first: they compare the committed term, not options, with the loan term, and a short lease means a short loan or a smaller one. New retailers with no trading history face the toughest assessment. Franchisees and chains opening another store, with trading accounts to show, are the easiest to fund. Ventas is a broker, not a lender, so we do not quote rates here. See our short answers on financing a shop fit-out and financing a fit-out if the lease is short.
Illustrative only, subject to lender assessment. A 100 square metre shop at the Melbourne typical rate of $1,800 per square metre:
| Item | Amount |
|---|---|
| Shopfitter works, 100 square metres at $1,800 | $180,000 |
| Shopfront and glazing | $30,000 |
| Signage | $8,000 |
| Design, centre approval and permits | $6,000 |
| Point of sale, shelving and fridges | $12,000 |
| Total cost | $236,000 |
| Less landlord contribution | $15,000 |
| Cash needed | $221,000 |
And how it is typically funded across lender types:
| Funding layer | Amount | What it covers | Secured on |
|---|---|---|---|
| Equipment finance | $45,000 | Point of sale, display fridges, loose shelving | The equipment itself |
| Business loan or property-backed loan | $120,000 | Joinery, shopfront and works | Business assets, guarantees, or a property |
| Your funds | $56,000 | Remainder, design and approvals | Cash |
| Total | $221,000 |
Only the movable items fund cheaply, because the lender can take them back. Built-in work needs a loan backed by the business, your guarantee or a property. What makes a deal fundable: a signed lease with a committed term at least as long as the loan, a written fitter quote with the shopfront priced, trading history or relevant experience, and a landlord contribution confirmed in writing. Ask your accountant how the fit-out costs are treated. To get a number from Ventas, send the floor area, the shopfitter's quote and the lease term at fit-out finance. Finance is subject to lender assessment and approval.
- whatsthedamage.com.au, Retail shop fit-out cost Melbourne ($900 to $2,475 per square metre, 150 square metre example $135,000 to $371,250, centre charges, landlord contributions; updated November 2026) (accessed 12 November 2026)
- whatsthedamage.com.au, Commercial fit-out cost Sydney (retail $1,000 / $2,000 / $2,750 per square metre including GST; older shopfronts; updated November 2026) (accessed 12 November 2026)
- whatsthedamage.com.au, Commercial fit-out cost Brisbane (retail $870 / $1,725 / $2,400, services upgrade $175 to $390, strip out $26 to $130, make good $70 to $305, including GST; November 2026) (accessed 12 November 2026)
- whatsthedamage.com.au, Commercial fit-out cost Adelaide (retail $800 / $1,600 / $2,200, make good $65 to $280 per square metre, including GST; November 2026) (accessed 12 November 2026)
- whatsthedamage.com.au, Commercial fit-out cost Perth (retail $915 / $1,825 / $2,500, make good $70 to $320 per square metre, including GST; November 2026) (accessed 12 November 2026)
- whatsthedamage.com.au, Commercial fit-out cost Australia (retail $1,000 / $2,000 / $2,750, make good $80 to $350 per square metre, prices include GST; November 2026) (accessed 12 November 2026)
- The Quote Yard, Retail shopfitting WA (basic $800 to $1,500, mid range $1,500 to $2,800, flagship $2,800 to $5,500; shopfront glazing, signage, centre design approval $1,500 to $8,000 over 3 to 8 weeks, make good $200 to $600 per square metre; published 28 July 2026) (accessed 12 November 2026)
- The Quote Yard, Shopfitting services SA (basic $800 to $1,500, mid range $1,500 to $2,800, high end $2,800 to $5,000; shopfront $15,000 to $60,000, joinery package $10,000 to $80,000, strip out $80 to $250 per square metre, make good $15,000 to $100,000; published 20 September 2026) (accessed 12 November 2026)
- WT Partnership, Airport Retail Fitout Study 2026 (more than $110 million across 13,500 square metres; airport premium; 24 July 2026) (accessed 12 November 2026)
- Vicinity Centres, The Market Pavilion (Chadstone) Tenancy Fit Out Criteria, file 2023a, opened in full (Category One works by the landlord's contractor at the tenant's cost; sprinkler modifications at the tenant's cost) (accessed 12 November 2026)
- Region Group, Design and Fitout Guide, document version v29 (design approval step marked week 5; Category 1 fire and mechanical works are landlord works at the tenant's cost; design manager reviews drawings) (accessed 12 November 2026)
- Victorian Small Business Commission, Retail Leases Information Brochure for Tenants, published 1 June 2026, use from 1 July 2026 (disclosure statement and lease at least 14 days before entering; make good obligation; fit-out costs to budget) (accessed 12 November 2026)
- Queensland Small Business Commissioner, Tips when entering a commercial lease, last updated 2 July 2026 (disclosure statement at least seven days before entry; make good question; condition report with photos signed by both sides) (accessed 12 November 2026)
- Unita via Inside Retail, From blueprint to storefront: the six stages of a successful retail fitout, 22 October 2025 (development applications, fire safety, hydraulics and heritage compliance have long lead times) (accessed 12 November 2026)
- Clayton Utz, Retail leases comparative analysis, lease costs and fit-out costs (state disclosure rules for fit-out contributions, current at 1 January 2025) (accessed 12 November 2026)
This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.
Frequently asked questions
How much does a retail shop fit-out cost in Australia?
Published 2026 guides put basic retail at $800 to $1,500 per square metre, mid range at $1,500 to $2,800, and flagship work at $2,800 to $5,000 or more. City guides put typical shopfit at $1,600 to $2,000 per square metre, with the shopfront often priced separately.
Is a shopping centre fit-out dearer than a strip shop?
Usually. Cost guides point to centre design approval, after-hours labour premiums, and charges for hoarding, inspections, security and waste. A WA guide puts centre design approval at $1,500 to $8,000 and 3 to 8 weeks. Strip shops avoid those charges but may need older buildings upgraded.
What is make good and how much is it?
Make good is returning the shop to the condition the lease requires when you leave. Published figures vary: $65 to $350 per square metre in city guides, $200 to $600 per square metre for WA retail, and $15,000 to $100,000 in a South Australian guide. Check your lease clause.
Can I get a landlord contribution to my fit-out?
Sometimes. Melbourne's cost guide says contributions are more available where vacancy is higher. In some states a clause making the tenant pay toward fit-out items is void unless disclosed before signing. Ask for the contribution and the disclosure statement in writing.
Can I finance a retail shop fit-out?
Often, but lenders are cautious because built-in joinery and shopfronts resell poorly. Movable equipment funds more easily. Lenders weigh the lease term against the loan term, your trading history and your security. Approval depends on the lender and the file, and Ventas does not promise approval.
Get your number from the lender panel
The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.
The fit-out, then the finance
Tell us the floor area, the shopfitter's quote and the lease term. We will come back with a structure, usually within a day.
This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.