Cost guides

What a concrete agitator truck costs in Australia

Ventas Asset Lending  |  Reviewed by Caleb Morehu  |  Updated 18 November 2026

A concrete agitator truck costs about $17,000 for an old Hino with a small drum, $49,000 to $79,000 for an older 8x4 with high hours, and $264,080 to $294,988 for a new 8x4 with a 7.5 to 7.6 cubic metre drum. Check whether the drum, GST and on-road costs are in the price.

$17,000 to $300,000used asking prices across the listings we opened
$264,080 to $294,988new complete Sitrak 8x4 agitators, South Australia, inc GST
7.5 to 7.6 m3drum on the new 8x4 trucks listed
$194,480 to $294,988one SA dealer, agitator cab chassis to complete truck, inc GST

An agitator truck is a cab chassis with a rotating drum on the back, and its price depends on both halves. A small older Japanese truck can be listed at $17,000 while a late-model 8x4 with a supply contract asks $300,000, and the same new Sitrak appears at $194,480 as a chassis and $294,988 as a complete truck. Drum size, age, hours, GST basis and whether a contract comes with the truck move the price. This guide sets out what 11 live listings across four states ask, what the drum adds, who buys these trucks, and how they are financed.

What concrete agitator trucks sell for

Concrete agitator trucks are priced in the same two ways everything in this trade is: a truck, and a drum on the back of it. Some sellers list the complete unit, some list a cab chassis and leave the drum to you, and the same make can appear at $194,480 and $294,988 in the same dealer yard. The table below uses listings opened on Truck World, Truck Dealers and CarsGuide on 17 November 2026. Figures are the seller's, indicative market data and not Ventas offers. Where a field is not shown on the listing it says Not disclosed. If you are pricing the pump that often follows these trucks onto a site, see our concrete pump cost guide.

ListingLocationDrum (cubic metres)Kilometres or hoursPrice shown
2013 Mack Metroliner CSMR 8x4 (Truck World 251191583)Dubbo, NSWAbout 7.6 (stated as capacity, unit not shown)317,878 km, 17,817 hours$79,000 ex GST
2014 Mack Granite CMMT 6x4 with tri-axle agitator trailer (Truck World 256477653)Dubbo, NSW12 cube bowl (unit not shown)166,842 km, 12,102 hours$229,000 ex GST
2009 Sterling LT7500 10x4 (Truck World 255656405)Rockhampton, QLDNot disclosed328,736 km, 19,476 hours$49,000 ex GST
2023 Isuzu FYJ 300-350 8x4, comes with a supply contract (Truck World 261459695)Postcode 4350, QLDNot disclosed187,047 km$300,000 or nearest offer ($272,727 plus GST)
2007 Hino FC4J, manual, sold as is (Truck World 262265649)Carisbrook, VICNot disclosed196,000 km$17,000, GST basis not stated
2016 Isuzu FYJ 8x4 on auction (Slattery Auctions, Melbourne Truck, Trailer and Machinery Auction)Not disclosed8Not disclosedNot disclosed, bid price not shown
2026 Sitrak G5S 8x4 with Zoomlion mixer, new (Truck Dealers AYH stock 33508 and AXV stock 33507, two identical units)Waterloo Corner, SA7.5 nominal37 km$264,080 inc GST
2026 Sitrak G5S 8x4 agitator, new (Truck Dealers BcE, stock 33153)Waterloo Corner, SA7.653 km$294,988 inc GST
2025 Sitrak G5S-M 350 8x4 agitator cab chassis, new (Truck Dealers 9Q9, stock 32234)Waterloo Corner, SANot disclosed52 km$194,480 inc GST
2026 Isuzu FYJ 300-350 agitator cab chassis, new (CarsGuide listing 14863766)Not disclosedNot disclosedNew$290,664 RRP, available to order
2025 Sitrak T5G 330 8x4 agitator, new (Truck World 230569719)Melbourne, VIC7.6 (Zoomlion body)Not disclosedCall for price

Four things stand out. First, new 8x4 agitators are almost all Sitrak (Sinotruk) in the listings we could open, with Isuzu FYJ the main Japanese alternative, so the new market starts near $265,000 for a complete 7.5 to 7.6 cubic metre truck and runs to about $295,000, with the Isuzu FYJ cab chassis at $290,664 RRP before any drum. Second, used price follows age, kilometres and hours, and whether a contract comes with the truck: the 2023 Isuzu asks $300,000, more than a new Sitrak, and the seller says it comes with a contract. Third, the cheapest listing is an older Japanese medium-duty truck: the 2007 Hino FC4J is a manual with 196,000 km, sold as is, and its drum size is not disclosed. Fourth, the listings cover four states (NSW, QLD, VIC and SA). We found no Western Australian or Tasmanian agitator we could open, so those buyers will be looking interstate or at dealer enquiries.

Price by drum size and band

Drum size is the other half of the price. Most new 8x4 trucks in the listings carry 7.5 to 7.6 cubic metres. The Sitrak at Waterloo Corner is listed with a 7.5 cubic metre nominal filling capacity, the Shepparton and BcE trucks at 7.6. Older and lighter trucks such as the Hino FC4J do not disclose a drum size, and the used Mack listings above show 7.6 and 12 cube bowls, though the unit is not shown for the larger one. A bigger drum carries more concrete per trip, but it needs a heavier chassis (the new Sitraks are rated at 31,000 kg GVM), and axle and bridge limits on the route matter as much as the drum.

BandPrice from the listingsDrum (cubic metres)What sits behind the price
Older Japanese medium-duty (Hino FC4J)$17,000 (one listing, GST basis not stated)Not disclosedManual, 196,000 km, sold as is
Used 8x4 or 10x4, older (Mack CSMR 2013, Sterling 2009)$49,000 to $79,000 ex GSTAbout 7.6 where stated300,000 plus km and 17,000 plus hours
Used late-model 8x4 (Isuzu FYJ 2023)$300,000 or nearest offerNot disclosed187,047 km, contract included
New 8x4, complete (Sitrak G5S)$264,080 to $294,988 inc GST7.5 to 7.6SA dealer, 31,000 kg GVM
New cab chassis only, drum extra (Sitrak G5S-M)$194,480 inc GSTNot disclosedAgitator-ready, PTO fitted

One more caution: prices on these sites carry different GST bases. Inc GST, ex GST and nothing stated all appear above. A $79,000 ex GST truck costs $86,900 with GST (our arithmetic), so line them up on one basis before you compare.

What the drum costs on its own

No supplier or dealer we found publishes the price of a drum on its own, so we do not give one. Isuzu Australia's agitator page lists the FY Series at 32,000 kg GVM with a 3-year factory warranty on the cab and chassis, says the chassis supports different barrel sizes, and publishes no prices, sending buyers to a dealer for a quote. It also says bodies shown on its site may cost extra. What the listings do show is that complete trucks and cab chassis sit at very different prices from the same South Australian dealer. A 2025 agitator cab chassis is $194,480 inc GST, a complete 2026 truck with a 7.5 cubic metre Zoomlion mixer is $264,080 inc GST, and a complete truck with a 7.6 cubic metre mixer is $294,988 inc GST. Those are different model years, specifications and stock, so the gaps are not a drum price. For scale, the same dealer lists a new Sitrak G7S 8x4 tipper at $216,480 inc GST.

If you are buying a chassis and a drum separately, get both quoted in writing and ask four things: who builds and warrants the drum, whether the PTO and hydraulics are fitted, who certifies the finished truck (the Sitrak listings mention VASS compliance for registration), and when the truck will actually be ready. A truck that is not earning is the expensive part of a late build.

Who buys an agitator and what to check

Agitator trucks are bought for hauling mixed concrete from a batching plant to site. Three kinds of buyer show up:

Check the drum, not just the truck. Dealers describe the drum condition in the used ads: the 2013 Mack listing says the bowl and flights are in good condition, and the 2007 Hino says the drum has minimal dried concrete on the flights. Worn flights and build-up cost money to repair, so inspect the inside before you pay. Ask whether a used drum is owned by the seller or by a concrete company, because a bowl owned by a plant may not leave with the truck. For tipper-based work with the same chassis questions, see our tipper truck cost guide.

Financing a concrete agitator truck

Concrete agitators are specialised trucks, and lenders know it. A truck that only works when a plant has contracts to give it is a smaller buyer pool at resale than a prime mover or a tipper. Lenders also look hard at newer-to-market chassis brands and older trucks with high hours, because the resale value is harder to pin down. Some will say no, some will want a larger deposit, and terms on an older truck are usually shorter. Ventas is a finance broker, not a lender, so we do not quote rates here. They change with the lender, the asset and the file.

Illustrative only, subject to lender assessment. A realistic purchase of a complete agitator truck at $270,000 ex GST:

ItemAmount
Truck and drum, complete$270,000
Registration, stamp duty and compliance (varies by state)$8,000
First insurance premium$6,000
Site safety fit-out, radios and sign-writing$4,000
Working capital for fuel, wages and wash-out until the first plant payment$20,000
Total cash needed$308,000

And how it is typically funded:

Funding layerAmountWhat it coversSecured on
Equipment finance (chattel mortgage) on the truck$216,00080 per cent of the truck and drumThe truck itself, plus guarantees
Deposit or trade-in$54,000The other 20 per cent of the truckCash or an old truck
Your funds or a property-backed loan$38,000On-road costs, insurance, fit-out and working capitalCash, or your home or other property
Total$308,000

Equipment finance is secured on the truck and valued on what a used agitator would resell for, which can be less than the price paid for a new Sitrak or a contract-backed truck. A truck finance loan can usually take the truck, but working capital and a thin deposit are where property-backed lending helps, with the trade-off that your property is at risk if the work stops. Whether GST is claimed back and how the purchase is deducted depends on your registration, so ask your accountant.

What makes an agitator deal fundable:

To get a number from Ventas, send the listing or dealer quote, the drum size and who builds it, the truck's age and hours, any plant contract, two years of financials and BAS, and what security you can offer. See concrete truck finance or our answer on how a concrete truck or agitator is financed. Finance is subject to lender assessment and approval.

Sources

This is general information only and not financial, credit, or tax advice. Figures are indicative market data from the sources listed, not Ventas offers, and move with the market. Consider your own circumstances and speak to a professional. All finance is subject to lender assessment and approval.

Frequently asked questions

How much does a concrete agitator truck cost in Australia?

Listings we opened run from $17,000 for a 2007 Hino to $300,000 for a 2023 Isuzu. New complete Sitrak 8x4 agitators with a 7.5 to 7.6 cubic metre drum are listed from $264,080 to $294,988 including GST in South Australia.

How much does a concrete agitator drum cost to fit?

No supplier we found publishes a drum-only price. One South Australian dealer lists an agitator cab chassis at $194,480 and complete trucks at $264,080 and $294,988, all including GST, but they differ in year and specification. Get the drum quoted in writing.

What drum size is normal on a new agitator truck?

The new 8x4 trucks we found carry 7.5 to 7.6 cubic metres on a chassis rated at 31,000 kg GVM. The smaller older trucks we found do not state a drum size. A bigger drum needs a heavier chassis and suitable axle and bridge limits.

Are used agitator trucks cheaper than new ones?

Older ones are, a lot: a 2013 Mack is $79,000 ex GST and a 2009 Sterling is $49,000 ex GST. A 2023 Isuzu with a contract asks $300,000, more than a new Sitrak, so age alone does not set the price.

Can I finance a concrete agitator truck?

Yes, usually through equipment finance such as a chattel mortgage secured on the truck. Lenders look at the supply contract, trading history, deposit and the age and hours of the truck. Finance is subject to lender assessment and approval.

CM
Reviewed by Caleb Morehu, Co-founder, Ventas Asset Lending. Caleb structures asset, property-backed and development finance and negotiates directly with lenders. Every figure on this page is checked against what lenders are actually approving. About Ventas.

Get your number from the lender panel

The figures above are indicative. Tell us what you are buying and we will come back with the real rate and repayment, usually within a day. No upfront fees and no credit check to get a quote.

No upfront fees. We are paid by the lender at settlement.

Found the agitator you want?

Send us the listing or the dealer quote and the work it is going to. We will come back with a structure, usually within a day.

This article is general information only and not financial, credit, or tax advice. Ventas Asset Lending is a finance broker, not a lender. Approvals are subject to lender assessment. Consider your own circumstances and speak to a qualified professional, including your accountant for any tax questions.

📞 Call now Get a quote →